Hitachi 55PD8800TA, 42PD8800TA user manual Activate the Multi Picture Mode in RGB Mode

42PD8800TA 55PD8800TA

FUNCTION (continued)

Multi Picture Mode (continued)

Activate the Multi Picture Mode in RGB Mode

When you activate the Multi Picture mode in RGB Input, the picture will be displayed at the mode which the Sub- screen is displayed inside of the large screen (Main-screen).

To activate Multi Picture mode, press on the remote control.

The speaker icon indicates the following.

The audio sounds can be heard on the side with the speaker icon.

When the speaker icon is on the Sub-screen

Change channels.

Switch the Input modes (TV and AV1~5) on the Sub-screen. (Main-screen is only for RGB Input.)

1.To shift the speaker icon , press ◄►buttons.

The speaker icon will be displayed in front of the Input mode indication.

2.To change the channel of the Sub-screen.

Make sure that mark is located on the Sub-screen.

Input mode indication

Main-screen (upper)

Sub screen (lower)

+

Press P to select channels.

-

3.To change the Input mode of the Sub-screen.

Make sure that the speaker icon is located next to the Input mode indication of the Sub-screen (lower).

Press Input Select buttons on the remote control. (AV1~5 are available)

4.To change the location of the Sub-screen.

Press ▲▼buttons. The Sub-screen will move up and down.

5.To exit from the Multi Picture mode, press button.

RGB

AV1

(Sub- screen)

NOTE

In case that the Input signal for the Sub-screen is either 1080i/50 or 1080i/60 Component signal, select “Movie” in “Frequency mode”. (See “Setup Menu” on 26 for details)

When operating Multi Picture mode, the “Power Save mode” is not available even though the Horizontal/Vertical Sync. Signal (or any kind of Video signal) has not input for certain period of time.

To prevent the image retention of the screen, do not leave the unit with operating Multi Picture mode for long hours.

43

HITACHI

Downloaded From TV-Manual.com Manuals	2005/11/10 17:53:31
PW3-12th-P40-P50.indd 43