Hitachi 55HDT52 important safety instructions AV NET Setup Wizard Example A/V Receiver Setup

On-Screen Display

Setup

AV NET SETUP WIZARD ( Example: A/V RECEIVER Setup)

1.Press the SELECT button to start the SETUP WIZARD.

AV Net Setup Wizard

Welcome to the AV Net Setup Wizard.

Before starting this wizard, please make sure that all devices are connected appropiately and the IR blasters are placed in front of the devices IR sensor.

Back Start

Move SEL Return

2. Use the CURSOR PAD or to highlight YES or NO.

3.Press the SELECT button to select “YES”.

(Select YES to setup an A/V Receiver or NO to setup other devices).

4. Use the CURSOR PAD , , and to highlight NEXT, then press the SELECT button to move on to the next SETUP screen.

AV Net Setup Wizard : A/V Receiver Setup

Do you want to use an A/V Receiver.

			Yes
			No
				Back		Next
		Move SEL	Select
5. Use the CURSOR PAD				or	to choose the
	brand name of your A/V Receiver.
6. Use the CURSOR PAD				, ,	and to
	highlight NEXT, then press the SELECT button
	to move on to the next SETUP screen.
		AV Net Setup Wizard : A/V Receiver Setup
		Please choose the Brand Name of your
		A/V Receiver. If you can not find the
		Brand Name, please choose “Other” and
		proceed to the Learning mode by pushing
		the Learning Mode Button.
		Brand Name	Hitachi	(1/54)
			Learning Mode
					Back	Next
		Move	Change Brand Name
7. Use the CURSOR PAD				or	to choose the
	preset IR Code.
8. Use the CURSOR PAD				to highlight the “

POWER ” Test button.

These On-screen buttons are called “ Soft

Keys ”.

9.Press the SELECT button to pass the Power command through the IR Mouse and onto the A/V Receiver ( Repeat steps 7 to 9 until finding the IR code that will power up the A/V Receiver. If the A/V Receiver turns ON, then you have found the correct preset IR code ).

10. Use the CURSOR PAD					,	,	and	to
	highlight NEXT, then press the SELECT button
	to move on to the next SETUP screen.
		AV Net Setup Wizard : A/V Receiver Setup
		Please choose the IR Code Set number.
		If the matched Code does not exist,
		please choose “Other” and proceed to
		the Learning mode.
		Brand Name	Hitachi		(44/54)
		IR Code Set	1	(1/12)
			Learning Mode
		Test Button	POWER		SOURCE 1		VOL
							Back	Next
		Move	Change IR Code
11. Use the CURSOR PAD					or		to select the TV
	Input that connects			to the video and audio
	output of the A/V Receiver.
12. Use the CURSOR PAD					,	,	and	to

highlight NEXT, then press the SELECT button to move on to the next SETUP screen.

AV Net Setup Wizard : A/V Receiver Setup

Brand Name	Hitachi		(44/54)
Brand Name	3	(3/12)
TV Input Settings
If you connect the video or audio
output of the A/V Receiver to this TV,
please select a TV Input.
TV Input	Not Connected
			Back	Next
Move	Change Input		SEL Select

13. Use the CURSOR PAD or to select the A/V Receiver Source if you have connected the Monitor Out and Optical Out to the A/V receiver. Select “ Not Connected “ if not used.

14. Use the CURSOR PAD , , and to highlight NEXT, then press the SELECT button to move on to the next SETUP screen.

AV Net Setup Wizard : A/V Receiver Setup

Brand Name	Hitachi		(44/54)
IR Code Set	3	(3/12)
TV Input	Hitachi
Monitor Out Settings
If you connect the Monitor out or Optical out
to an A/V Receiver, please select
an A/V Receiver Source.
Monitor Out	Not Connected
Optical Out	Not Connected
			Back	Next
Move	Change Source		SEL Select

80