Hitachi 55HDT52 important safety instructions To move on to the next Setup screen

Setup

7. Use the CURSOR PAD or to choose the device you wish to learn. (Example: DVD 3)

8.Select NEXT to continue.

AV Net Setup Wizard : Custom Settings

Custom settings

Please choose the device you wish to learn.

Custom Device DVD3

Back Next

Move SEL Select

9.Select the DVD 3 softkey to learn.

(Example: PLAY button).

10. Select NEXT to continue.

AV Net Setup Wizard : Custom Settings

Select the DVD3 softkey to learn?

TV Softkeys

POWER

MENU

SELECT

EXIT

Back Done

Move SEL Select

11. Press and hold the “Play button” of the DVD remote control while pointing directly at the learning AV NET sensor of the Plasma TV (located at the lower right corner of the screen) at a distance of 3.2 feet or 1 meter maximum.

AV Net Setup Wizard : Custom Settings

Press and hold desired button to transfer the command to AV NET.

Please wait while AV NET

Learns the command....

Move SEL Select

12.If the IR Code transfer was successful, the screen below appears, then select “OK” to continue setup.

AV Net Setup Wizard : Custom Settings

Transfer was successful.

Press OK to store and continue.

Cancel OK

Move SEL Select

13.Select another softkey to learn or select “DONE” to move on to the next screen.

AV Net Setup Wizard : Custom Settings

Select the DVD3 softkey to learn?

TV Softkeys

POWER

MENU

SELECT

EXIT

Back Done

Move SEL Select

14.	Select the Test button			“Play button” to
	check the response of the device to this
	command.
15.	Use the CURSOR PAD			,	,	and	to
	highlight NEXT, then press the SELECT button
	to move on to the next SETUP screen.
		AV Net Setup Wizard : Device Settings
		DVD3 Settings
		Brand Name	Custom
		IR Code Set	Custom
		Transmission Test
		Test Button	POWER		CH
					Back	Next
		Move	SEL IR Out
16.	Use the CURSOR PAD				or	to select the TV
	Input that connects to the video and audio
	output of the DVD.
17.	Use the CURSOR PAD			,	,	and	to

highlight NEXT, then press the SELECT button to move on to the next SETUP screen.

AV Net Setup Wizard : Device Settings
DVD3 Settings
Brand Name	Custom
IR Code Set	Custom
Inputs settings
Video Input	Not Connected
Audio Input	Not Connected
		Back	Next
Move	Change Source	SEL Select

18.Confirm all settings, then press the SELECT button to move on to the next SETUP screen.

AV Net Setup Wizard : Device Settings

DVD3 Settings
Brand Name	Custom
IR Code Set	Custom
Video Input	Not Connected
Audio Input	Not Connected

All settings are complete!

	Back	Next
Move	SEL Select

On-Screen Display

85