Hitachi 42PD6000TA user manual PC Mode

HITACHI MODEL 42PD6000TA

OPERATING INSTRUCTIONS (continued)

System Menu (continued)

PC Mode

Selected characters			W				X	Setup hint
Signal Format		(off the function)				-		Press the ENTER button to show the information of the current input signal.
Advanced		Press ENTER button to select the following functions
Gamma		2.2			2.6	2.8		Adjust to preference.
Panel Lock			On			Off		This is for locking out the control panel function.
								Adjust to prevent children from touching.
								Adjust to preference.
	Mode	Off		Mode 1			Mode 2	The moves the picture around the screen to reduce the panel image retention.
								This is where stationary objects, such as screen logos, leave a slight image
Move Screen								visible after they should have disappeared.
								Adjust to preference.
	Time			5 ~ 255 sec				This moves the picture around the screen in small amounts, at set intervals, to
								reduce the panel image retention. This is where stationary objects, such as
								screen logos, leave a slight image visible after they should have disappeared.
PIP Set		Press ENTER button to select the following functions
Source		TV		AV			SV	Adjust to preference.
Size		Small		Medium			Large	Adjust to preference.
		9 positions for selection:
Position		Upper Left, Upper Center, Upper Right,						Adjust to preference.
		Middle Left, Middle Center, Middle Right,
		Lower Left, Lower Center, Lower Right
Audio Source			Main			PIP		Adjust to preference.
		Black is subdued for			Black is set off for
	Brightness	increased overall			increased overall			Adjust to preference.
		darkness.			brightness.
PIP Display		Narrows the gap			Broadens the gap			Adjust for maximum visibility to suit the ambient brightness.
	Contrast	between brightness			between brightness
								For normal viewing we recommend that the Contrast is set to [46].
		and darkness.			and darkness.
	Color	Decrease color			Increase color			Adjust to preference.
		intensity.			intensity.
Swap			Main			PIP		Adjust to preference.
Power Save			On			Off		This is used to reduce power consumption when there is no signal. Setting it
								On will lead the PDP TV to the standby mode when the PC input no signal.
System Reset		(off the function)				-		The original factory settings for the items of this Menu page can be restored by
								pressing the ENTER button.

ENGLISH

33