Hitachi 42PD6000TA user manual Troubleshooting, Symptoms That Seemingly Appear to be Failures

Page 37

HITACHI MODEL 42PD6000TA

TROUBLESHOOTING

Symptoms That Seemingly Appear to be Failures

Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer.

Customer servicing can be hazardous.

Symptom		Point to check	See page

• No picture with the power-indicating		• Check the way the power cord is connected.	23
lamp off.		• Press the power switch.	24
			24

• The message “No Input Signal. Going to		No input signal is detected.
suspend” or “Power Save” is displayed.	No Input Signal	• Check the way the signal cable is connected.
• No picture with the power indicating lamp	No Input Signal	• Make sure that the switch of the computer, imaging
• No picture with the power indicating lamp		• Make sure that the switch of the computer, imaging
lights in orange.		equipment, etc., is turned on.	22

•Make sure the computer is not in the power-save mode.

•Check to see if the input selection matches the connection terminal.

• The message “No Input Signal. Going to		An input signal is not received normally.	22
sleep” is displayed.	No Input Signal	• Check to see if the input signal matches the	40
	No Input Signal	specifications.


		• Check the way the signal cable is connected.
• The power indicating lamp is normally lit		• Check the contrast and brightness settings (adjust them for	19
but no picture.		higher contrast and brightness).	28
		• Check the way the signal cable is connected.	28
		• Check the way the signal cable is connected.
• The display image appears flowing		• Adjust the dot clock frequency and phase. (Adjust the dot
slantwise.		clock frequency first, the dot clock phase next.)	29
• Text displayed across the screen		(PC RGB input)	29
• Text displayed across the screen		(PC RGB input)
appears vertically streaked, with the			41
characters in vertical columns blurred.

• Text displayed across the screen		• Adjust the dot clock phase for the clearest viewing.
appears blurred.		(PC RGB input)	29
• A fine pattern flickers when displayed on			29
• A fine pattern flickers when displayed on
the screen.			41

• The remote control does not work.		• Check to see if the batteries are loaded in the remote	11
		control in opposite direction.	11
		• Check to see if the batteries in the remote control are OK.
• The display image does not appear in		• Check to see if the displayed input signal match the PDP	31
the normal position.		TV specification by pressing RECALL button.	40
		• Turn off the Move screen.	40
		• Turn off the Move screen.
• The display has lack of picture around		• Turn off the Move screen.
the screen.			31
(PC RGB input)
• The temperature of the display panel surface is high.		• The plasma display panel is lighting the phosphors by the
		discharge of internal radiation. In some cases, this may	-
		cause the temperature of the panel surface to increase.	-
		cause the temperature of the panel surface to increase.
		Please note that this is not a malfunction.

ENGLISH

37

Image 37

Contents Hitachi Model 42PD6000TA Read before operating equipment Important Safety InstructionsLarge-screen, high-definition plasma display panel FeaturesContents About the Symbols Safety InstructionsBe cautious of the power cord connection Safety Instructions About the SymbolsRemove the power cord for complete separation Avoid a high temperature environmentInstallation environment How to view the PDP TVPrecaution during transportation Precautions for the cable connectionDo not physically impact the remote control Set the sound volume at a suitable levelAbout screen defects Image Retention of Plasma DisplayAbout residual images About the panel screenMain Unit Component NamesFront Control panel RearLoading Batteries Component Names Remote controlFunction Buttons VOLUME+/- buttons Power buttonII button Mute buttonSort Edit button 20. P. Mode button21. P. Size button PIP Swap button Zoom +/- buttonsPIP Input button Quick buttonTV/TEXT button Cancel buttonBlue button Yellow buttonInstallation Installation InstructionsHitachi Model 42PD6000TA Connecting Hdtv Sources Connecting a DVD Player English Connecting PC Installation Instructions Connecting to a PCBe cautious of the power cord connection Installation Instructions Power Cord ConnectionOperating Instructions Turning Power On and OffIndicating lamp Volume Adjustment Input SwitchingOperating Instructions Audio MuteDisplay will go out in approximately 3 seconds Operating Instructions Input Signal Screen DisplayTV/Video Mode Remote control：PC Mode Control panel：Operating Instructions Video Menu Selected characters Setup hintSize Operating Instructions Image MenuLanguage Menu Operating Instructions Audio MenuAFC Operating Instructions System MenuNtsc PAL B/G PC Mode A2 / Nicam / Sound Multiplex TV mode Audio SwitchingOther Functions Signal Check TV/Video mode Other Functions Signal Check Analog RGB modeMode Status Display Action Status Display ActionWhen the Analog RGB input is selected Other Functions Power Save ModeReturning to operating status Symptoms That Seemingly Appear to be Failures TroubleshootingSymptom Point to check See Hitachi Model 42PD6000TA Press the button and select Horizontal Clock Troubleshooting Actions to Correct Abnormal DisplaysProduct Specifications With composite input and S-Video input Product Specifications Recommended Signal ListWith YCBCR/YPBPR input With Hdmi inputWith Analog RGB signal input