Hitachi L40A105A Time Shift, Preparation, USB status display, To delete the recorded program

Page 21

Time Shift

You can record a digital program by using the USB memory drive. This function is for your convenience, and allows you to pause/record a live program for a period of time based on the size of the USB drive inserted.

Note: The connected USB device must;

• Have a minimum approx. 100 MB of memory (32 GB max.).

• Formatted as FAT16/32.

• Have a write speed higher than 40Mb/sec.

• Contain no other files.

• Do not use USB extension cable.

Preparation:

Plug-in an external storage device into USB port.

To start recording, press (PAUSE). The recording will start and the picture will be paused.

To view a live program, press ■ (STOP). The paused picture goes back to a live program and recording continues.

To stop recording, press ■ (STOP) again during viewing a live program with recording.

To start playback, press (PLAY). The recorded program starts playback.

If you want to watch the program while recording, press (PLAY).

You can watch the recorded program while recording the current program.

To pause the playback picture, press (PAUSE).

To stop the playback, press (STOP).

To fast forward or fast reverse, press (SKIP–)or (SKIP+).

USB status display

Press DISPLAY while watching a DTV channel, or press the Time Shift operation buttons. The status display will appear.

Playback status :

(PLAY), (STOP), (PAUSE), (SKIP+), (SKIP-)

 

Delayed time from the current program

 

or Playing time in the play mode.

Recording

• If there are no recorded program in

the USB memory, --:--:-- will appear

USB Memory Information

Delay Time : 00:02:09

Message: Now Play View

Message display

 

• Now Live View... Viewing live program

• Now Play View... Viewing recorded program

• Now Pause View... Pausing the program

• Not Available... Inhibited function

• USB Memory is full...Caution of available USB memory

less than 100MB (Insufficient USB free space...will show

when (PAUSE) is pressed.

(PLAY) and there are no

• No Data... When you press

data recorded in the USB memory

• USB Memory is unplugged... USB memory is not connected

To delete the recorded program

Disconnect the USB memory, record another program, or turn off the TV.

Note:

• Time shift does not work for ATV or external inputs. If you change the signal while recording a program (Live View), recording will stop.

• During Play view mode, ATV channel select or input select will not work.

• Time shift recordable time is approximately 10 minutes per 1 GB for HD or 30 minutes for SD (depending on the programs).

• You cannot watch the recorded program on a PC or other device.

• All of the USB memory may not able to be used.

• We will accept no responsibility whatsoever for loss of files on USB devices caused by connection to this unit.

ENGLISH

21

Image 21
Contents Owner’s Guide Location of the required Marking Energy StarLead/Mercury Notice Important Safety Instructions HOW to Handle the LCD Panel Power sourceDeclaration of Conformity CondensationChild Safety Notice Securing to a Wall Safety PrecautionsHow to remove the stand How to attach the standFeatures Power sourceTo USE AC Power Contents Location of controls Front Left sideRear Battery Precautions Remote controlCH Channel / Buttons Press to change Time Shift control Buttons SeeCable TV connections Antenna connectionsTo select the video input source TV operationExample Select Menu Language Quick guide for menu operationConvenience functions Icon Selected Items Setup hintMemorizing channels Setting the Parental Control Checking the digital signal strengthLabeling channels Labeling video inputsTo set the Parental Control To clear the all Parental Control settings To change the passwordClosed Caption CC advancedAspect Switching Preparation Time ShiftUSB status display To delete the recorded programTo connect the LCD TV to a VCR Connections to other equipmentTo connect the LCD TV to a camcorder, or a game console VCRTo connect an audio system Using an AV Amplifier with built-in digital surroundTo connect a Hdmi or a DVI device to the unit To return to normal modeTo connect the TV to a PC Personal Computer Rear and Left of the unitReception disturbances Symptoms Possible Solutions TroubleshootingAccessories SpecificationsGeneral TelevisionOrion AMERICA, INC Limited WarrantyMemo