Hitachi L40A105A important safety instructions Reception disturbances

Page 25

Reception disturbances

IGNITION NOISE:

Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances.

GHOSTS:

Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected from tall buildings, hills or some other objects. Changing the direction or position of the antenna may improve reception. Ghosting may also be caused by defects in the antenna system such as unshielded leads or connecting several sets to the same antenna without using multiple antenna couplers.

SNOW:

If your receiver is located in the fringe area of a television station where the signal is weak, your picture may be marred by the appearance of small dots. When the signal is extremely weak, it may be necessary to install a special antenna to improve the picture.

RADIO FREQUENCY INTERFERENCE:

The interference produces moving ripples or diagonal streaks, and in some cases, causes loss of contrast in the picture.

PREVENTION OF AN OBSTACLE TO RADIO RECEIVERS

This television has been designed pursuant to the FCC class B Rules. This is to prevent a problem to

Radio receivers. If this television causes a problem to Radio receivers, then take the following steps:

Keep the television away from Radio.

Adjust Radio antennas in order for the television not to receive interference.

The antenna cable of Radio should be kept away from the television.

Use a coaxial cable for antenna.

You can check if this television influences Radio receivers by turning off all other equipment other than the television. If you find a problem receiving Radio when using the television, check the instructions mentioned above.

BLOCK NOISE or FREEZE (DIGITAL INPUT):

Fuzzy blocks may appear in some area or the whole area of the screen. This is usually caused by interference from automobile ignition systems, neon lamps, electrical drills, ghosting of the image and lost or weak receiving signals.

BLACK SCREEN:

When using an antenna, weak signals will display a black screen. It may be necessary to upgrade your antenna.

NOTE:

• The TV set can generate sound distortion in external devices such as a radio. Please separate radio equipment from the TV set to a considerable distance.

ENGLISH

25

Image 25
Contents Owner’s Guide Energy Star Location of the required MarkingLead/Mercury Notice Important Safety Instructions HOW to Handle the LCD Panel Power sourceDeclaration of Conformity CondensationChild Safety Notice Securing to a Wall Safety PrecautionsHow to remove the stand How to attach the standPower source FeaturesTo USE AC Power Contents Front Left side Location of controlsRear Battery Precautions Remote controlCH Channel / Buttons Press to change Time Shift control Buttons SeeCable TV connections Antenna connectionsTo select the video input source TV operationExample Select Menu Language Quick guide for menu operationConvenience functions Icon Selected Items Setup hintMemorizing channels Setting the Parental Control Checking the digital signal strengthLabeling channels Labeling video inputsTo set the Parental Control To clear the all Parental Control settings To change the passwordClosed Caption CC advancedAspect Switching Preparation Time ShiftUSB status display To delete the recorded programTo connect the LCD TV to a VCR Connections to other equipmentTo connect the LCD TV to a camcorder, or a game console VCRTo connect an audio system Using an AV Amplifier with built-in digital surroundTo connect a Hdmi or a DVI device to the unit To return to normal modeTo connect the TV to a PC Personal Computer Rear and Left of the unitReception disturbances Symptoms Possible Solutions TroubleshootingAccessories SpecificationsGeneral TelevisionOrion AMERICA, INC Limited WarrantyMemo