Hitachi L40A105A important safety instructions How to attach the stand, How to remove the stand

Page 7

How to attach the stand

NOTE:

Unplug the AC cord from the AC INPUT terminal.

Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid any damage to the unit.

Do not touch or press the LCD screen, the glass might break under pressure.

Place the TV on its front onto a table.

Align the stand’s bottom-plate (supplied) as seen here. It will fit in only one direction.

Hold the unit and attach the stand frame (a) slowly and secure the stand frame (a) with the 3 screws (supplied). (M4x35mm), as shown in Figure 1.

(b)

LCD PANEL FRONT

(a)

(b)

Figure 1

Figure 2

Finally secure the bottom-plate (b) with 3 screws (supplied) (M4x12mm) as indicated by the arrows in Figure 2.

• Be sure to follow the instructions. Insufficient tightening or incorrect installation of the stand will not support your unit correctly, and could result in damage or injury from tip-over.

How to remove the stand

When you transport this product, remove the stand and pack flat against the back of the unit in the carton. To remove the stand, perform these steps in reverse order.

For wall mounting, the base must be removed. To disconnect the base/stand remove the 3 screws from the back.

Screws

ENGLISH

7

Image 7
Contents Owner’s Guide Energy Star Location of the required MarkingLead/Mercury Notice Important Safety Instructions Condensation Power sourceHOW to Handle the LCD Panel Declaration of ConformityChild Safety Notice Securing to a Wall Safety PrecautionsHow to remove the stand How to attach the standPower source FeaturesTo USE AC Power Contents Front Left side Location of controlsRear Time Shift control Buttons See Remote controlBattery Precautions CH Channel / Buttons Press to changeCable TV connections Antenna connectionsTo select the video input source TV operationExample Select Menu Language Quick guide for menu operationConvenience functions Icon Selected Items Setup hintMemorizing channels Labeling video inputs Checking the digital signal strengthSetting the Parental Control Labeling channelsTo set the Parental Control CC advanced To change the passwordTo clear the all Parental Control settings Closed CaptionAspect Switching To delete the recorded program Time ShiftPreparation USB status displayVCR Connections to other equipmentTo connect the LCD TV to a VCR To connect the LCD TV to a camcorder, or a game consoleTo connect an audio system Using an AV Amplifier with built-in digital surroundRear and Left of the unit To return to normal modeTo connect a Hdmi or a DVI device to the unit To connect the TV to a PC Personal ComputerReception disturbances Symptoms Possible Solutions TroubleshootingTelevision SpecificationsAccessories GeneralOrion AMERICA, INC Limited WarrantyMemo