To seach for analogue channels, select “Yes”. The menu below is displayed to search for analogue chan- nels.
Select your Language, Country and Text language by using α / β and _ / ‾ buttons. Press OK button to continue. To cancel, press BLUE button.
For more information on this process, see “Install Menu” section.
NOTE: For proper functioning of digital teletext in DTV mode, you should set country as UK in analogue AUTO PROGRAM.
Basic Operations
You can operate your TV using both the remote control and onset buttons.
Operation with the buttons on the TV
Volume Setting
•Press 
- button to decrease volume or 
+ button to increase volume, so a volume level scale (slider) will be displayed at the middle of the bottom on the screen.
Programme Selection
•Press P/CH + button to select the next programme or P/CH - button to select the previous programme.
Entering Main Menu
•Press the MENU button to enter Main menu. In the Main menu select
buttons and enter the 
- or 
+ buttons. To learn the usage of the menus, refer to the Menu System sections.
Operation with Remote Control
The remote control of your TV is designed to control all the functions of the model you selected. The func- tions will be described in accordance with the menu system of your TV.
Functions of the menu system are described in the following sections.
Volume Setting
Press 
button to increase volume. Press 
but- ton to decrease volume. A volume level scale (slider) will be displayed in the middle at the bottom of the screen.
Programme Selection (Previous or next programme)
•Press P - button to select the previous programme.
•Press P + button to select the next programme.
Programme Selection (direct access):
Press digit buttons on the remote control to select programmes between 0 and 9. TV will switch to the selected programme. To select programmes between 10 - 999 (for IDTV) or
Press directly the programme number to reselect single digit programmes.
Everyday Operation
Pressing the 
button at any time while watch-
ing television programmes will switch the TV set be- tween displaying the digital terrestrial television broad- casting and its normal analogue broadcasting.
Information Banner
Whenever you change channel, using the
by pressing the 
button on the remote control.
The information banner gives a number of facts on the channel selected and the programmes on it. The name of the channel is displayed, along with its chan- nel list number and an indication of the strength of the signal received on this tuning channel.
Hint
Not all channels broadcast the programme data. If the name and times of the programmeis not available then “No Information Available” are displayed in the information banner.
Downloaded From