Press the 
button to display the Main menu, high-
light the Configuration line using 
or 
button andpress the OK button to display the Configuration menu.
Highlight the “Subtitle” item in Configuration menu
and use 
or 
button to set Subtitle to off or a language.
If “Subtitle” is on via selecting one language option,
pressing the 
button causes the following warn-
ing messagedisplayon thescreen.
Digital Teletext
With Digital terrestrial broadcasting
Digital teletext is sometimes broadcast at the same time as normal broadcasting.
1. Press the 
button.
The digital teletext information appears.
2. Operate it with the coloured buttons, 
/ 
/ 
/ 
buttons and OK button.
The operation method may differ depending on the contents of the digital teletext.
Follow the instructions displayed on digital teletext screen.
•When “Press SELECT” button or similar message appears on the screen, press the OK button.
•When the 
(Text) button is pressed, the TV re- turns to television broadcasting.
•With Digital terrestrial broadcasting
•The aspect ratio when watching a channel with just digital teletext broadcasting is the same as the aspect ratio of the picture watched previously.
•When you press the 
(Text) button again, the digital teletext screen is displayed.
Over Air Download
To ensure that your IDTV always has the most
may be broadcast and will download this to your IDTV automatically. This operation will normally take approximately 30 seconds.
If you want to do this, you need to set Automatic Download to “Enabled” in Receiver Upgrade set- ting. For details see page 17.
Widescreen
Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats.
Press the 
button repeatedly to select between Auto, Full, 4:3,Panoramic, 14:9 Zoom, Cinema or 16:9 Subtitle.
When Auto is selected, the format being displayed is determined by the picture being broadcast.
PLEASE NOTE: Menu size changes depending on the chosen image size.
IDTV Menu System
The IDTV menu can only be shown when watching
Digital terrestrial broadcasting. Press the 
but- ton to turn IDTV on while TV is in analogue mode. Press the 
button. The menu below appears on the
screen:
Channel List
Using the 
or 
button on the remote control in Main menu, make sure that the first item, Channel List, is highlighted and press the OK button to display the Channel List.
The following operations can be performed in this menu:
1.Navigating the whole list of channels
2.Deleting channels
3.Renaming channels
4.Adding locks to channels
5.Setting favourites
Downloaded From