Gefen EXT-HDMI1.3IR-FO-141 user manual Connecting and Operating the Hdmi 1.3 Over Fiber with IR

Page 9

CONNECTING AND OPERATING THE HDMI 1.3 Over Fiber with IR

1.Connect the HDMI source to the HDMI 1.3 Over Fiber with IR sending unit’s HDMI input port using the supplied HDMI cable.

2.Connect the RS-232 source to the HDMI 1.3 Over Fiber with IR sending unit’s RS-232 input port using the supplied DB-9 serial cable.

3.For IR repeater functionality, please connect the IR emitter’s mini-jack (sold separately, part # EXT-2IREMIT) into the HDMI 1.3 Over Fiber with IR sending unit. Place the IR emitter directly on or above the IR receiver of the desired source device.

4.Connect the HDMI 1.3 Over Fiber with IR sending and receiving units together using one user supplied SC terminated multi-mode fiber optic cable and one CAT-5, CAT-5e or CAT-6 cable.

NOTE: If field terminating network cable, please adhere to the TIA/EIA568B specification. Please see page 7 for more information.

5.Connect the display to the HDMI output port of the HDMI 1.3 Over Fiber with IR receiving unit using a user supplied HDMI cable.

6.Connect the RS-232 device to the RS-232 output port of the HDMI 1.3 Over Fiber with IR receiving unit using a user supplied DB-9 serial cable.

7.Plug the included 5V DC power supplies into the HDMI 1.3 Over Fiber with IR sending and receiving units.

8.Power on the display first and the source second.

5

Image 9
Contents Over Fiber with IR Technical Support Hours Technical SupportWrite To Hdmi 1.3 Over Fiber with IR is a trademark of Gefen IncTable of Contents Gefen IntroductionHdmi 1.3 Over Fiber with IR How It WorksOperation Notes Features FeaturesHdmi 1.3 Features Package IncludesSender Panel Descriptions Receiver Panel Descriptions Connecting and Operating the Hdmi 1.3 Over Fiber with IR Pin Color Network Cable Wiring DiagramSpecifications