3-6-5. Checking After Installation

Check that there are no gaps between the unit and the ceiling panel, or between the ceiling panel and the ceiling sur- face. Gaps may cause water leakage and condensation.

Check that the wiring is securely connected.

If it is not securely connected, the auto flap will not operate. In addition, water leakage and condensation may occur.

3-6-6. When Removing the Ceiling Panel for Servicing

When removing the ceiling panel for servicing, remove the air-intake grille and air filter, disconnect the flap and the indi- cator wiring connectors inside the control box, and then remove the 4 mounting screws.

3-6-7. Adjusting the Auto Flap

The air-direction flap on the ceiling panel outlet can be adjusted as follows.

Adjust the flap to the desired angle using the remote controller. The flap also has an automatic air-sweeping mecha- nism.

NOTE

Never attempt to move the flap by hand.

Proper air flow depends on the location of the air conditioner, the layout of the room and furniture, etc. If cooling or heating seems inadequate, try changing the direction of the air flow.

3-7. Wiring Instructions

General precautions on wiring

(1)Before wiring, confirm the rated voltage of the unit as shown on its nameplate, then carry out the wiring closely fol- lowing the wiring diagram.

(2)Provide a power outlet to be used exclusively for each unit, with a power supply disconnect and circuit breaker for overcurrent protection provided in the exclusive line.

(3)To prevent possible hazards due to insulation failure, the unit must be grounded.

(4)Each wiring connection must be done tightly and in accordance with the wiring system diagram. Wrong wiring may cause the unit to misoperate or become damaged.

(5)Do not allow wiring to touch the refrigerant tubing, compressor, or any moving parts of the fan.

(6)Unauthorized changes in the internal wiring can be very dangerous. The manufacturer will accept no responsibility for any damage or misoperation that occurs as a result of such unauthorized changes.

3-8. Wiring Instructions for Inter-unit Connections

(1)Remove the 1 screw from the terminal cover, then open the cover. Be careful that the cover does not fall.

(2)Remove the 3 screws from the power box cover, then open the cover. Be careful that the cover does not fall.

(3)Use the screw to securely fasten the ground wire from the outdoor unit in place.

(4)Remove the transparent plastic cover from the 3P terminal plate.

(5)While viewing the wiring diagram, connect the inter-unit and power supply line to terminals 1, 2 and 3 on the 3P terminal plate.

(6)Remount the transparent plastic cover onto the 3P terminal plate.

(7)Be sure to use the clamping strap to fasten the wires in place.

(8)Tighten the screws to remount the terminal and the power box cover.

Power wiring (Locally purchased)

Clamping strap

Earth screw

Inter unit (Conduit)

Fig. 8

11

Page 84
Image 84
Sanyo XMHS0972 Checking After Installation, When Removing the Ceiling Panel for Servicing, Adjusting the Auto Flap

XMHS1272, XMHS0972 specifications

Sanyo has long been a recognized name in the landscape of home appliances and audio-visual equipment, and their XMHS series, particularly the XMHS0972 and XMHS1272 models, offers innovative technology and impressive features for discerning users. These models are designed to cater to a wide range of needs, making them suitable for different environments, whether it’s for personal use or for larger gatherings.

The Sanyo XMHS0972 and XMHS1272 are notable for their sleek design, ensuring they blend seamlessly into any interior decor. Their modern aesthetics are matched by functionality, providing users with a combination of style and efficiency. Both models incorporate advanced technologies that have garnered positive reviews in terms of usability and performance.

One of the standout features of the XMHS0972 and XMHS1272 is their audio capabilities. They deliver high-quality sound, thanks to Sanyo’s proprietary sound enhancement technologies. These models are equipped with powerful speakers that produce clear, vibrant audio, making them ideal for music playback, movie watching, and more.

In terms of connectivity, both models come with a variety of options. They support Bluetooth connectivity, allowing users to easily stream music wirelessly from smartphones, laptops, and other Bluetooth-enabled devices. Additionally, they feature USB ports and auxiliary inputs for versatile connectivity options, making them adaptable to different multimedia setups.

Energy efficiency is another important aspect of the XMHS0972 and XMHS1272. Sanyo has incorporated energy-saving technologies into these models, ensuring they consume less power while maintaining optimal performance. This is particularly beneficial for users who are conscious of their environmental footprint and are looking to reduce energy costs.

The user interface is designed with convenience in mind, featuring an intuitive control panel and remote control options. This allows users to easily navigate through settings and features without any hassle.

In conclusion, the Sanyo XMHS0972 and XMHS1272 models are powerful and efficient options for anyone in need of high-quality audio and versatile connectivity. With their stylish design, advanced technology features, and reduced energy consumption, they stand out as innovative choices for modern users looking to enhance their entertainment experience.