SPECIAL REMARKS

‘‘DRY’’ ( ) Operation

How it works?

Once the room temperature reaches the level that was set, the unit’s operation frequency is changed automatically.

During DRY operation, the fan speed automatically runs at lower speed for providing a comfortable breeze.

‘‘DRY’’ operation is not possible if the indoor temperature is 59 °F or less.

Heating ( ) Operation

Heating performance

Because this air conditioner heats a room by drawing in the heat of the outside air (heat pump system), the heating efficiency will fall off when the outdoor temperature is very low. If sufficient heat cannot be obtained with this air conditioner, use another heating appliance together with it.

Defrosting

When the outdoor temperature is low, frost or ice may form on the heat exchanger coil, reducing heating performance. When this happens, a microcomputer defrosting system operates. At the same time, the fan on the indoor unit stops and the OPERATION lamp lights red and orange alternately until defrosting is completed. Heating operation restarts after several minutes. (This interval will vary slightly depending upon the outdoor temperature and the way in which frost forms.)

Cold draft prevention

For several minutes after the start of heating operation, the indoor fan runs at a lower speed until the indoor heat exchanger coil has warmed up sufficiently. However, the fan may remain stopped when the room temperature is low. This is because the COLD DRAFT PREVENTION SYSTEM is in operation.

Cooling ( ) operation

Sometimes the indoor unit may not get to the set fan speed such as LOW under cool operation at very low outdoor temperatures due to the indoor unit being protected from ice or frost.

Power failure during operation

In the event of power failure, the unit will stop. When the power is resumed, the unit will restart automatically in approximately

15 minutes by the remote control unit.

Clicking Sound

Clicking sound is heard from the air conditioner

In heating or cooling operation, any plastic parts may expand or shrink due to a sudden temperature change. In this event, a clicking sound may occur. This is normal, and the sound will soon disappear.

Remote Control Unit

The remote control unit sends the setting condition to the air conditioner regularly at five minute intervals.

SETTING THE TIMER

NOTE

In the descriptions below, the following settings are used for the temperature and time indicator selector button on the bottom front section of the remote control unit.

Temperature: °F

Time: AM, PM

1. How to set the present time

(Example) To set to 10:30 pm.

 

Operation

Indication

 

 

 

1.

Press the CLOCK button

The time indication alone

 

once if the time indicator is

flashes.

 

not flashing.

 

2.

Press the Advance, Return

The time can be set in 1-minute

 

( , ) button until PM 10:30

increments. Holding down the

 

is displayed.

button advances the time rapidly

 

 

in 10-minute increments.

3.

Press the CLOCK button

This completes the setting of the

 

again.

current time.

 

 

 

OI-140-11-EG

11

 

Page 50
Image 50
Sanyo XMHS0972, XMHS1272 service manual Special Remarks, Setting the Timer

XMHS1272, XMHS0972 specifications

Sanyo has long been a recognized name in the landscape of home appliances and audio-visual equipment, and their XMHS series, particularly the XMHS0972 and XMHS1272 models, offers innovative technology and impressive features for discerning users. These models are designed to cater to a wide range of needs, making them suitable for different environments, whether it’s for personal use or for larger gatherings.

The Sanyo XMHS0972 and XMHS1272 are notable for their sleek design, ensuring they blend seamlessly into any interior decor. Their modern aesthetics are matched by functionality, providing users with a combination of style and efficiency. Both models incorporate advanced technologies that have garnered positive reviews in terms of usability and performance.

One of the standout features of the XMHS0972 and XMHS1272 is their audio capabilities. They deliver high-quality sound, thanks to Sanyo’s proprietary sound enhancement technologies. These models are equipped with powerful speakers that produce clear, vibrant audio, making them ideal for music playback, movie watching, and more.

In terms of connectivity, both models come with a variety of options. They support Bluetooth connectivity, allowing users to easily stream music wirelessly from smartphones, laptops, and other Bluetooth-enabled devices. Additionally, they feature USB ports and auxiliary inputs for versatile connectivity options, making them adaptable to different multimedia setups.

Energy efficiency is another important aspect of the XMHS0972 and XMHS1272. Sanyo has incorporated energy-saving technologies into these models, ensuring they consume less power while maintaining optimal performance. This is particularly beneficial for users who are conscious of their environmental footprint and are looking to reduce energy costs.

The user interface is designed with convenience in mind, featuring an intuitive control panel and remote control options. This allows users to easily navigate through settings and features without any hassle.

In conclusion, the Sanyo XMHS0972 and XMHS1272 models are powerful and efficient options for anyone in need of high-quality audio and versatile connectivity. With their stylish design, advanced technology features, and reduced energy consumption, they stand out as innovative choices for modern users looking to enhance their entertainment experience.