(2)Removing the corner cover and indicator cover

a)While lightly pressing the cen- ter of the corner cover, pull up the tab for the screw hole. Use the same procedure to remove the indicator cover. (Fig. 6-16)

Corner cover

Indicator cover

1 Press

2 Pull up

Fig. 6-16

3-6-2. Installing the Ceiling Panel

(1)Hang the temporary latches on the inside of the ceil- ing panel to the receptacle on the unit to temporarily attach the ceiling panel in place. (Fig. 6-17)

The ceiling panel must be installed in the correct direction relative to the unit. Align the REF. PIPE and DRAIN marks on the ceiling panel corner with the correct positions on the unit.

(2)Align the panel installation holes and the unit screw holes. (Fig. 6-18)

(3)Tighten the supplied special screws at the 4 panel installation locations so that the panel is attached tightly to the unit.

Check that the wiring connectors are not caught between the unit and the ceiling panel.

(4)Check that the panel is attached tightly to the ceiling. (Fig. 6-19)

At this time, make sure that there are no gaps between the unit and the ceiling panel, or between the ceiling panel and the ceiling surface.

If there is a gap between the panel and the ceiling, leave the ceiling panel attached and make fine adjustments to the installation height of the unit to eliminate the gap with the ceiling.

CAUTION

Temporary latches

Temporary latch

Fig. 6-17

Refrigerant tubing joint

Drainage check

Ceiling panel

REF.PIPE mark

DRAIN mark

Panel installation hole

(4 locations)

Special screws

Fig. 6-18

 

Do not allow

Indoor unit

gaps

Ceiling surface

Ceiling panel

Fig. 6-19

If the screws are not sufficiently tightened, trouble such as that shown in the figure below may occur. Be sure to tighten

the screws securely.

Air leakage

Air leakage from ceiling surface

Staining

Condensation, water leakage

If a gap remains between the ceiling surface and the ceiling panel even after the screws are tightened, adjust the height of the unit again.

Adjust so that there are no gaps.

Fig. 6-20

The height of the unit can be adjusted from the ceiling panel corner hole, with the ceiling panel attached, to an extent that does not affect the unit levelness,

the drain hose, or other elements.

9

Page 82
Image 82
Sanyo XMHS0972, XMHS1272 service manual Installing the Ceiling Panel, Indoor unit Gaps Ceiling surface Ceiling panel

XMHS1272, XMHS0972 specifications

Sanyo has long been a recognized name in the landscape of home appliances and audio-visual equipment, and their XMHS series, particularly the XMHS0972 and XMHS1272 models, offers innovative technology and impressive features for discerning users. These models are designed to cater to a wide range of needs, making them suitable for different environments, whether it’s for personal use or for larger gatherings.

The Sanyo XMHS0972 and XMHS1272 are notable for their sleek design, ensuring they blend seamlessly into any interior decor. Their modern aesthetics are matched by functionality, providing users with a combination of style and efficiency. Both models incorporate advanced technologies that have garnered positive reviews in terms of usability and performance.

One of the standout features of the XMHS0972 and XMHS1272 is their audio capabilities. They deliver high-quality sound, thanks to Sanyo’s proprietary sound enhancement technologies. These models are equipped with powerful speakers that produce clear, vibrant audio, making them ideal for music playback, movie watching, and more.

In terms of connectivity, both models come with a variety of options. They support Bluetooth connectivity, allowing users to easily stream music wirelessly from smartphones, laptops, and other Bluetooth-enabled devices. Additionally, they feature USB ports and auxiliary inputs for versatile connectivity options, making them adaptable to different multimedia setups.

Energy efficiency is another important aspect of the XMHS0972 and XMHS1272. Sanyo has incorporated energy-saving technologies into these models, ensuring they consume less power while maintaining optimal performance. This is particularly beneficial for users who are conscious of their environmental footprint and are looking to reduce energy costs.

The user interface is designed with convenience in mind, featuring an intuitive control panel and remote control options. This allows users to easily navigate through settings and features without any hassle.

In conclusion, the Sanyo XMHS0972 and XMHS1272 models are powerful and efficient options for anyone in need of high-quality audio and versatile connectivity. With their stylish design, advanced technology features, and reduced energy consumption, they stand out as innovative choices for modern users looking to enhance their entertainment experience.