USING THE REMOTE CONTROL UNIT

HOW TO INSTALL BATTERIES

ACL button

1.Slide the cover in the direction indicated by the arrow and remove it.

2.Install two AAA alkaline batteries. Make sure the batteries point in the direction marked in the battery compartment.

3.Use a thin object such as the tip of a pen to press the ACL button.

NOTE

•The batteries last about six months, depending on how much you use the remote control unit. Replace the batteries when the remote control unit’s display fails to light, or when the remote control unit cannot be used to change the air conditioner’s settings.

•Use two fresh leak-proof type-AAA alkaline batteries.

•In replacing batteries, follow the instructions as mentioned in the subsection “HOW TO INSTALL BATTERIES”.

•If you do not use the remote control unit more than 1 month, take out the batteries.

•Dispose of the used batteries at the designated location in compliance with the applicable local ordinances.

S/M (Single/Multiple switch)

•Initially, the S/M switch is set to S (Single).

•Set this switch to M (Multiple) for multiple operation.

•Always press ACL button by a thin object such as the tip of a pen after setting the S/M switch.

NOTE

When multiple indoor units are used and units in other rooms are already operating, they will be operating with the same mode as the operating indoor units.

HOW TO USE THE REMOTE CONTROL UNIT

When using the remote control unit, always point the unit’s transmitter head directly at the air conditioner’s receiver.

Air conditioner (Indoor unit)

 

Receiver

Remote control

(Transmitter

head)

unit

 

REMOTE CONTROL UNIT INSTALLATION POSITION

The remote control unit may be operated either from a non-fixed position or from a wall-mounted position. To ensure that the air conditioner operates correctly, DO NOT install the remote control unit in the following places:

DO NOT

•In direct sunlight

•Behind a curtain or other places where it is covered

•More than 26 ft.(8 m) away from the air conditioner

•In the path of the air conditioner’s airstream

•Where it may become extremely hot or cold

•Where it may be subject to electrical or magnetic noise

•Where there is an obstacle between the remote control unit and air conditioner (since a check signal is sent from the remote control unit every 5 minutes)

MOUNTING THE REMOTE CONTROL UNIT

Before mounting the remote control unit, press the ON/OFF operation button at the mounting location to make sure that the air conditioner operates from that location. The indoor unit should make a beeping sound to indicate that it has received the signal.

Rear side

Remote control unit mount

 

Press

 

 

Set in

Hole

 

place

 

 

Mounting screws

 

 

5/32 x 5/8"

• To prevent loss of the remote control

(4 x 16 mm)

unit, you can connect the remote

(included)

control unit to the mount by passing

a string through the remote control unit and attachment hole.

To take out the remote control unit, pull it forward.

WHEN HOLDING THE REMOTE CONTROL UNIT

•When using the remote control unit and during air conditioner operation, the transmitter on the remote control unit should be pointed towards the receiver on the indoor unit.

•Make sure that there are no objects between the remote control unit and receiver which could block the signal.

8

OI-107-8-EG

 

Page 63 Page 65
Page 64
Image 64
Sanyo XMHS0972, XMHS1272 service manual OI-107-8-EG
Page 63 Page 65

XMHS1272, XMHS0972 specifications

Sanyo has long been a recognized name in the landscape of home appliances and audio-visual equipment, and their XMHS series, particularly the XMHS0972 and XMHS1272 models, offers innovative technology and impressive features for discerning users. These models are designed to cater to a wide range of needs, making them suitable for different environments, whether it’s for personal use or for larger gatherings.

The Sanyo XMHS0972 and XMHS1272 are notable for their sleek design, ensuring they blend seamlessly into any interior decor. Their modern aesthetics are matched by functionality, providing users with a combination of style and efficiency. Both models incorporate advanced technologies that have garnered positive reviews in terms of usability and performance.

One of the standout features of the XMHS0972 and XMHS1272 is their audio capabilities. They deliver high-quality sound, thanks to Sanyo’s proprietary sound enhancement technologies. These models are equipped with powerful speakers that produce clear, vibrant audio, making them ideal for music playback, movie watching, and more.

In terms of connectivity, both models come with a variety of options. They support Bluetooth connectivity, allowing users to easily stream music wirelessly from smartphones, laptops, and other Bluetooth-enabled devices. Additionally, they feature USB ports and auxiliary inputs for versatile connectivity options, making them adaptable to different multimedia setups.

Energy efficiency is another important aspect of the XMHS0972 and XMHS1272. Sanyo has incorporated energy-saving technologies into these models, ensuring they consume less power while maintaining optimal performance. This is particularly beneficial for users who are conscious of their environmental footprint and are looking to reduce energy costs.

The user interface is designed with convenience in mind, featuring an intuitive control panel and remote control options. This allows users to easily navigate through settings and features without any hassle.

In conclusion, the Sanyo XMHS0972 and XMHS1272 models are powerful and efficient options for anyone in need of high-quality audio and versatile connectivity. With their stylish design, advanced technology features, and reduced energy consumption, they stand out as innovative choices for modern users looking to enhance their entertainment experience.
Top Page Image Contents