Panasonic VDR-D300 operating instructions Connecting to the AC outlet, Turning the unit on/off

Models: VDR-D300

1 180
Download 180 pages 34.43 Kb
Page 30
Image 30

Power supply

Connecting to the AC outlet

1Connect the AC cable to the AC adaptor and the AC outlet.

2Connect the DC cable to the AC adaptor.

3Connect the DC cable to this unit.

Do not use the AC cable for other equipment since the AC cable is exclusively designed for this unit. Do not use the AC cable from other equipment for this unit.

While the DC cable is connected to the AC adaptor, the battery will not charge.

Setup

Turning the unit on/off

(VDR-D250 only) When recording, remove the lens cap before turning the unit on.

If the unit is turned on with the lens cap attached, the automatic white balance adjustment (l 163) may not function properly.

How to turn on the power

While pressing the button A, set the

 

OFF/ON switch to ON.

A

The status indicator B lights and the power turns on. ≥ (VDR-D300 only) In disc recording mode or card

recording mode, the lens cover opens.

B

≥ When the unit is turned on for the first time, a message asking you to set the date and time will appear. Select [YES] and set the date and time. (l 45)

30

LSQT1011

Page 30
Image 30
Panasonic VDR-D300 operating instructions Connecting to the AC outlet, Turning the unit on/off