Panasonic VDR-D300 Recording Move the joystick up to select, About the black balance adjustment

Manual recording functions

To set the white balance manually

1 Select [ ], fill the screen with a white subject.

MNL

BACK

Recording

2 Move the joystick up to select [].

When the [	] display changes from flashing to on, setting is	MNL
complete.
≥ When the [	] display continues flashing green, the white balance	BACK

cannot be set because the place is dark etc. In this case, use the automatic white balance.

∫About the white balance sensor A

The white balance sensor detects the type of light source during recording. Do not cover the white balance sensor during recording, or it may not function properly.

A

∫About the black balance adjustment

This is one of the 3CCD system functions that automatically adjusts the black when the white balance is set in the manual adjustment mode. When the black balance is adjusted, the screen will temporarily be black. (The black balance cannot be adjusted manually.)

1	Black balance adjustment in progress. (Flashes.) 1	2	3
2	White balance adjustment in progress. (Flashes.)
3	Adjustment completed. (Lights up.)

≥ When the [	] display flashes white, the manual	≥ (VDR-D250 only) When the unit is turned on with
white balance previously adjusted is stored.		the lens cap attached, the automatic white balance
Whenever recording conditions change, re-set the		adjustment may not function properly. Please turn
white balance for correct adjustment.		the unit on after removing the lens cap.

≥When setting both the white balance and the iris/ gain, set the white balance first.

74

LSQT1011