Using discs on a computer (Macintosh)

12 Click [Create Menu] (A) and edit the DVD menu as

A B

required, then click [Write to Disc] (B).

 

 

 

 

 

 

13Check [Create disc] (A), select the drive to be used (B) and then click [Write] (C).

A

B

C

14 Insert a brand-new 12 cm (5z) DVD-RW or DVD-R disc into the disc drive and click [OK].

≥ 12 cm (5z) iRW and iR discs can also be used if the disc drive supports them.

15 Proceed with the write setting and then click [OK].

Writing to the disc starts.

Depending on the amount of data, writing to the disc may take time.

When the unit is connected to a computer, the operation mode cannot be changed and its power cannot be turned off.

In this case, disconnect the USB cable (l below).

When the unit is connected to a computer in disc playback mode, no image will appear on the LCD monitor or viewfinder.

When this unit is connected to a computer, you cannot use this unit’s DISC EJECT lever to remove a disc. Use the software’s eject button to eject the disc.

When a computer is accessing a disc in this unit, the ACCESS/PC lamp lights. Do not disconnect the USB cable or AC adaptor while the disc is being accessed as it may damage the data.

With a computer

To disconnect USB cable safely

When the drive icon is displayed on the desktop:

Drag the icon into the Trash and then disconnect the USB cable.

When the drive icon is not displayed on the desktop:

Exit the application and then disconnect the USB cable.

If you disconnect the USB cable while the access lamp is on, it may damage the data.

139

LSQT1011

Page 139
Image 139
Panasonic VDR-D300 139, Proceed with the write setting and then click OK, When the drive icon is displayed on the desktop