Panasonic VDR-D300 operating instructions 110

With a printer (PictBridge)

6 Select the date print setting on [ DATE PRINT].

≥If the printer is not capable of date printing, this setting is unavailable.

7 Select the paper size setting on [ PAPER SIZE].

STANDARD:	Size specific to the printer
4t5 INCH:	L size
5t7 INCH:	2L size
4t6 INCH:	Postcard size
A4:	A4 size

≥You cannot set paper sizes not supported on the printer.

8 Select the layout setting on [ PAGE LAYOUT].

STANDARD: Layout specific to the printer

: No frame print

: Frame print

≥You cannot set page layouts not supported on the printer.

other products

9 Select [PRINT] # [YES] and press the joystick.

The pictures are printed.

≥Exit PictBridge by disconnecting the USB cable (supplied) after the pictures have been printed.

When you stop printing halfway

Move the joystick down.

A confirmation message appears. If [YES] is selected, the number of prints set is canceled and the screen returns to step 3. If [NO] is selected, all the settings are kept and the screen returns to step 3.

With

≥Avoid the following operations during printing. These operations disable proper printing.

–Disconnecting the USB cable

–Removing the SD card

–Switching the mode dial

–Turning off the power

≥Check the settings for the paper size, quality of print, etc. on the printer.

≥The sides of pictures recorded when [ 2 ] (VDR-D300)/[ 1.7 ] (VDR-D250) is set may be cut at printing. Check before printing.

When using the printer with a trimming feature or other feature which cuts out both edges of the pictures, cancel the feature for printing. (Refer to the operating instructions of the printer for details.)

≥You may not be able to print still pictures recorded with other products.

≥When the unit is connected directly to the printer, the DPOF settings cannot be used.

≥Connect the printer directly to this unit. Do not use a USB hub.

110

LSQT1011