Panasonic VDR-D300 operating instructions Other menus, 144

Menus

Other menus

∫[ REC LAMP]

≥ OFF ≥ ON

The recording lamp lights during recording and flashes when the unit receives a signal from the remote control. When this is set to [OFF], it does not light during recording.

∫[ DISPLAY]

	≥ OFF		≥ ON
	The screen indications are selected as shown
	in the illustration below.
	OFF
						;
				12.15.2006
	ON
				SP	0h00m00s	;
				R 0h00m			O.I.S.
				12.15.2006
	∫ [	POWER SAVE]
	≥ OFF		≥ 5 MINUTES
	[OFF]: The power saving function is not
		activated.
	[5 MINUTES]:
		When about 5 minutes passed without
		any operation, this unit automatically
		turns off to prevent the battery from
		running down. When you use this unit,
		turn it on again.
	≥ In the following cases, the unit may not turn
Others	off even when you set this to [5 MINUTES].
	– When using the AC adaptor
	– When connecting the unit to a computer or
	printer via the USB cable
	∫ [	BEEP SOUND]
	≥ OFF		≥ ON

This allows operations such as starting and ending recording to be signaled by a beep. When [OFF] is set, no beep is heard when an operation such as recording is started or ended.

144

1 Beep

When you start recording When you turn on the power

When this unit is recognized by the computer or the printer, etc.

2 Beeps

When you pause recording

When you turn off the power

2 Beeps for 4 times

When an error occurs e.g. recording not starting. Check the sentence displayed on the screen. (l 147)

∫[ INITIAL SET]

≥ YES ≥ NO

When there is a menu that cannot be selected depending on a combination of functions, set to [YES] for changing the menu settings back to the initial shipping condition.

(Language setting cannot be back to the initial shipping condition.)

∫[ JOYSTICK LED]

≥ OFF ≥ ON

If set to [ON], the circumference of the joystick lights up in blue during operation.

∫[ DEMO DEMO MODE]

≥ OFF ≥ ON

This item is used to start the unit demonstration.

(Only when using the AC adaptor and the mode

dial is at the or position)

If you set this to [ON] without inserting a disc or an SD card, this unit is automatically set to the demonstration mode for introducing its functions. If any button is pressed or operated, the demonstration mode is canceled. If no operations take place for approx. 10 minutes, the demonstration mode automatically starts. To terminate the demonstration mode, insert a disc or an SD card, or set this to [OFF]. For normal use, set this function to [OFF].

LSQT1011