Panasonic VDR-D300 Setting date and time, ≥ The 12-hour system is used to display the time

Setting date and time

Setting date and time

When the unit is turned on for the first time, a message asking you to set the date and time will appear.

≥Select [YES] and press the joystick. Perform steps 2 and 3 below to set the date and time. If the screen shows the incorrect date and time, then adjust it.

¬Rotate the mode dial to select or .

1Press the MENU button, then select [ BASIC] # [ CLOCK SET] # [YES] and press the joystick.

2Move the joystick left or right to select the item to be set. Then, move the joystick up or down to set the desired value.

≥The year will change as follows: 2000, 2001, ..., 2099, 2000, ...

≥The 12-hour system is used to display the time.

3Press the joystick to enter the selection.

≥After pressing the MENU button to finish the setting, check the date and time display.

≥The clock function starts at [00] seconds.

Setup

45

LSQT1011