Setting date and time

Changing the date and time display style

Press the MENU button, then select [ SETUP] # [ DATE/ TIME] # desired display style and press the joystick.

You can also show or change the date and time display by

repeatedly pressing the DATE/TIME button on the remote control.

[DATE]

[D/T]

[OFF]

Setup

3:30 PM

12.15.200612.15.2006

The recording time is not displayed in disc playback mode.

Changing the display style

Press the MENU button, then select [ SETUP] #

[ DATE FORMAT] # desired display style and press the joystick.

Display

Y/M/D

M/D/Y

D/M/Y

style

 

 

 

Screen

2006.12.15

12.15.2006

15.12.2006

display

 

 

 

 

 

 

 

The date and time function are driven by a built-in lithium battery.

Make sure to check the time before recording.

If the time display becomes [--], the built-in lithium battery has run down. Use the following steps to charge the battery. When you turn on the power for the first time after charging, a message asking you to set the date and time will appear. Select [YES] and set the date and time.

To recharge the built-in lithium battery

Connect the AC adaptor or attach the battery to the unit, and the built-in lithium battery will be recharged. Leave the unit as is for approx.

24 hours, and the battery will save the date and time for approx. 6 months. (Even if the OFF/ON switch is set to OFF, the battery is still being recharged.)

46

LSQT1011

Page 46
Image 46
Panasonic VDR-D300 Date OFF, ≥ The recording time is not displayed in disc playback mode, 2006.12.15 12.15.2006 15.12.2006