Panasonic VDR-D300 operating instructions 155

Troubleshooting

Problem

Check points

The images on the SD	≥ The data may be destroyed. It may have been destroyed by
	static or electromagnetic waves. Store important data on a
card do not look normal.
	computer or other products as well.
Even if a disc or a card is ≥ Either this unit or the disc or card may be damaged. Please
formatted, it cannot be	consult a dealer. Use an SD Memory Card from 8 MB to
used.	2 GB with this unit.
	≥ Is this unit connected to a computer?
The indication	# No operation can be performed on this unit when it is
	connected to a computer.
disappears.
	≥ Turn off the power to this unit. If the power cannot be
The screen is frozen.	turned off, press the RESET button, or remove the battery
No operation can be	or AC adaptor and then reattach it. After that, turn on the
	power again. If normal operation is still not restored,
performed.
	detach the power connected, and consult the dealer who
	you purchased this unit from.
	≥ The unit has automatically detected an error. Press the
	RESET button with the projecting part of the grip belt A.
	This will restart the unit.

“PUSH THE RESET
	A
SWITCH.” is displayed.
	≥ If you do not press the RESET button, the power to this
	unit is turned off automatically about 1 minute later.
	≥ Even after you press the RESET button, the indication may
	still appear repeatedly. If so, this unit needs repair. Detach
	the power connected, and consult the dealer who you
	purchased this unit from. Do not attempt to repair the
	appliance by yourself.

Others

155

LSQT1011