Panasonic VDR-D300 With a printer PictBridge, 109, Connect this unit and a printer

With a printer (PictBridge)

With a printer (PictBridge)

(SD)

To print pictures by directly connecting this unit to the printer, use a printer compatible with PictBridge. (Read the operating instructions for the printer.)

≥Use the AC adaptor to free you from worrying about the battery running down.

¬Insert an SD card with recorded images in the unit, turn on the unit and then rotate the mode dial to select .

1Press the MENU button, then select [ SETUP]

# [ USB FUNCTION] # [PictBridge] and press

the joystick.

≥Press the MENU button to exit the menu screen.

2 Connect this unit and a printer.

AUSB cable (supplied)

≥Insert the plugs as far as they will go.

The [	] indication appears on this unit’s
screen.
≥ If the [	] indication does not appear or

continues to flash, disconnect and then reconnect the
USB cable or check the printer, SD card and settings on
this unit.	A
≥ Do not use any other USB cables except the supplied
one. (Operation is not guaranteed with any other USB
cables.)

3 Select a file to be printed, then press the joystick.

The number of pictures set is displayed.

4 Move the joystick up or down to select the desired number of prints, then press the joystick.

≥You can set up to 9 prints.

≥To cancel the setting, set the number of prints to [0].

≥Up to 8 files displayed on a page can be set in succession by repeating steps 3 and 4.

5Press the MENU button to display the PictBridge menus.

With other products

109

LSQT1011