Parts identification and handling

Using the Magic Wire Remote Control (optional)

This remote control can be used from different high and low angles. It is also handy when a tripod is used. When you do not use the remote control, attach the clip to the grip belt. Left-handed users can use this unit more easily.

1

Recording start/stop button [REC]

1

2

Zoom lever [W/T]

2

3

Photoshot button [PHOTO SHOT]

 

3

Connect the Magic Wire Remote Control to the unit

Plug the Magic Wire Remote Control into the

REMOTE/MIC terminal as far as it goes.

Before using

If the pin plug of the remote control is not inserted securely into the REMOTE/MIC terminal as far as it will go, normal operation may not be ensured.

Before using, make sure that the plug is inserted securely into the terminal as far as it will go.

About the clip (on the backside)

When you move with the clip fitted to your pocket or elsewhere, beware of knocking over the tripod or causing the unit to fall off the table.

22

LSQT1011

Page 22
Image 22
Panasonic VDR-D300 Using the Magic Wire Remote Control optional, Connect the Magic Wire Remote Control to the unit