Panasonic VDR-D300 Using grip belt, Adjust the belt length so it fits your hand

Parts identification and handling

	25	Card slot cover (l 34)
	26	Card slot (l 34)
	27	Tripod receptacle (l 18)
	28	Card access lamp (l 34)
	29	Battery release lever [BATTERY RELEASE]
		(l 28)
	30	Speaker
	31	LCD monitor (l 19)
		Due to limitations in LCD production
		technology, there may be some tiny bright or
		dark spots on the LCD monitor screen.
		However, this is not a malfunction and does
		not affect the recorded picture.
	32	Mode select switch [AUTO/MANUAL/FOCUS]
		(l 49, 70)
	33	Power LCD button [POWER LCD] (l 47)
using	34	Reset button [RESET] (l 155)
	35	Disc eject lever [DISC EJECT] (l 32)
	36 Disc/computer access lamp [ACCESS/PC]
Before		(l 32, 124, 139)
	37	Disc compartment (l 32)
	38	Grip belt (l below)
	39	Shoulder strap fixture (l 17)

25 26 27 28 29

30

	32
31	33
	34

35 36 37 38

39

Using grip belt

Adjust the belt length so it fits your hand.

(U.S.A. only)
When this unit is purchased, a sensor tag is attached to the
grip belt. Remove the tag before use.
1	Flip the belt.	3	2
2	Take off the tag.
			1
3	Replace the belt.

Adjust the belt length and the pad position.

1Flip the belt.

2Adjust the length.

3 Fix the belt.

2 1 3

16

LSQT1011