Panasonic VDR-D300 operating instructions Messages, 147

Indications

Messages

CANNOT RECORD.	Data writing to the disc or card has failed.
NO DATA.	There are no images recorded on the disc or card.
THIS DISC IS	You inserted an incompatible disc (copy-protected discs, etc.).
INCOMPATIBLE.
PLEASE CHECK THE	You inserted a disc that cannot be read on this unit (a disc
DISC.	recorded in PAL video format etc.).
	You inserted a disc that does not meet the DVD standard for
	quality and performance so you may not be able to record
RECOMMENDED TO USE	normally. Refer to the following support site for information
	about discs that have been confirmed as compatible by
PANASONIC DISC
	Panasonic.
	http://panasonic.co.jp/pavc/global/cs/e_cam
	(This website is in English only.)
AGS MODE ON -REC	The AGS function is activated. (l 49)
PAUSED
CANNOT RECORD.	A finalized DVD-RW (Video format) or DVD-R has been
	inserted. After finalizing, the discs become play-only and cannot
(THIS DISC IS FINALIZED)	record. If you un-finalize a DVD-RW (Video format), it can be
	used for recording. (l 101)
CANNOT RECORD. DISC
IS FULL.	The disc is full or the number of scenes has reached the
CANNOT RECORD. THE
	maximum limit so no further data can be recorded. Delete
NUMBER OF SCENES HAS	unnecessary scenes (l 81) or insert a new disc.
EXCEEDED THE MAXIMUM
LIMIT.
CANNOT OPERATE.	The temperature of the unit is high so it cannot be operated.
TEMPERATURE IS HIGH.
	Turn off the power, wait until the unit cools and then turn on the
PLEASE TURN OFF AND
	power again.
WAIT A WHILE.
	DVD-R cannot be un-finalized.
CANNOT UN-FINALIZE	DVD-RW (VR format) cannot be un-finalized. DVD-RW (VR	Others
THIS DISC.	format) after finalization can be recorded and edited in the same
	way as DVD-RW (VR format) before finalization.
CHECK CARD.	This card is not compatible or it cannot be recognized by the
	unit.
CARD LOCKED.	The write protection switch on the SD Memory Card is set to
	LOCK. (l 26)

147

LSQT1011