Panasonic VDR-D300 operating instructions Press the Photo Shot button fully to take the picture

Recording still pictures

5 Press the PHOTO SHOT button fully to take the picture.

≥For information about the number of recordable still pictures on an SD card (l 167)

≥When the [PICTURE SIZE] is set to other than [ 0.3M ], the mega pixel recording mode is set.

≥The sound cannot be recorded.

≥If the write protection switch on the SD card is set to LOCK, it cannot be used for recording.

≥The PHOTO SHOT button on the remote control and the Magic Wire Remote Control cannot be pressed halfway.

≥If the [PICT. QUALITY] is set to [ ], mosaic- pattern noise may appear on a playback image depending on the picture content.

≥While this unit accesses the SD card ( is displayed/the access lamp is lit), do not perform the following operations. The SD card or the recorded data may be damaged.

–Turn the unit off.

–Remove the SD card.

–Operate the mode dial.

≥Another product may degrade or not play back still pictures recorded on this unit.

∫To record still pictures clearly

≥When zooming in on the subject with a magnification of 4k or higher, it is difficult to reduce the slight shaking from holding this unit by hand. We recommend decreasing the zoom magnification and approaching the subject when recording.

≥When recording still pictures, hold the unit firmly with your hands and keep your arms stationary at your side so as not to shake the unit.

≥You can record stable pictures without shaking by using a tripod and the remote control.

Screen indications in card recording mode

ARemaining number of still pictures

(Flashes in red when [R 0] appears.)	A	R 100
B Size of still pictures
C Quality of still pictures	B
	C

Recording

53

LSQT1011