Panasonic VDR-D300 119, ≥ You cannot install the application if you click No

Installation (Windows)

5 Read carefully through the End User License Agreement (l 117), then click [Yes].

≥You cannot install the application if you click [No].

6 Click [Next].

Continue to follow the on-screen messages to install it.

7When installation is complete, some notes will appear:

Check the contents, then click [k] at the top right of window.

8 Click [Finish].

Windows 2000 only:

The detection of device will start, after which it will take several minutes for the computer to detect the device. When detecting the device is complete, a message that prompts you to reboot will appear:

Click [Yes].

The computer must be rebooted for the driver to work.

∫If any trouble has occurred while installing DVD-RAM Driver:

When the [Block] is selected in the [Driver Signing Options] in the [System Properties], the installation procedure will not complete. Select [Warn] and try again.

To check and change the setting, select [start] # ([Settings] #) [Control Panel] # ([Performance and Maintenance] #) [System] and select [Driver Signing] of the [Hardware] tab.

∫About the [RAMASST] support tool:

[RAMASST] is a support tool for Windows XP that disables the drive’s CD writing function so that data can be written from a computer to a DVD-RAM.

When you install the DVD-RAM Driver, [RAMASST] is automatically installed and displayed in [Startup].

With a computer

119

LSQT1011