Panasonic VDR-D300 Adjusting LCD monitor/viewfinder, Bar display moves, Lcd Set, Evf Evf Set

Adjusting LCD monitor/viewfinder

Adjusting LCD monitor/viewfinder

Adjusting the brightness and color level

1Press the MENU button, then select [ SETUP]

# [ LCD SET] or [ EVF EVF SET] # [YES] and press the joystick.

2Move the joystick up or down to select the item to be adjusted. Then, move the joystick left or right

to make the adjustment.

	The bar display moves.
[		LCD SET]
:		Brightness of the LCD monitor
:		Color level of the LCD monitor
	[ EVF EVF SET]
	EVF : Brightness of the viewfinder
≥ To adjust the brightness of the viewfinder, close the			≥ When the LCD monitor is rotated by 180° towards
	LCD monitor and extend the viewfinder to activate		the lens, the brightness and color level of the LCD
	it.		monitor cannot be adjusted.
			≥ These settings will not affect the images actually
			recorded.

Setup

∫In order to increase the brightness of the entire LCD monitor

Press the POWER LCD button.

The [ ] indication appears on the LCD monitor.

≥ The entire LCD monitor will become approx. twice as bright as usual.

≥When the POWER LCD button is pressed again,

the [ ] indication disappears and the original brightness is restored.

≥This will not affect the images to be recorded.

≥If you turn on the unit when the AC adaptor is used, this function will automatically be activated.

Adjusting the field of view

Adjust the focus by sliding the eyepiece corrector knob.

12..15..2006

12.15.2006

47

LSQT1011