Panasonic VDR-D300 Recording motion pictures, Turn the unit on Rotate the mode dial to select

Recording motion pictures

Recording motion pictures

(RAM) (-RW‹VR›) (-RW‹V›) (-R)

Recording

50

Record motion pictures onto a disc.

≥When the unit is purchased, the aspect ratio is set to [16:9] for recording images compatible with a wide-screen TV.

To watch images on a regular TV (4:3), change the aspect ratio setting (l 66) before recording the images or when watching them on the connected TV (l 105).

≥(VDR-D250 only) Remove the lens cap before turning the unit on.

If the unit is turned on with the lens cap attached, the automatic white balance adjustment may not function properly.

1Turn the unit on.

2Rotate the mode dial to select .

(VDR-D300 only) The lens cover opens automatically.

3Open the LCD monitor or extend the viewfinder.

4Press the recording start/stop

button to start recording.

To end the recording

Press the recording start/stop button again to pause recording.

≥[¥] and [;] are red during recording. Do not move this unit until [;] is green.

≥The images recorded between pressing the recording start/stop button to start recording and pressing it again to pause recording become one scene.

≥When about 5 minutes have passed without any operation in recording pause, the unit automatically turns off to prevent the battery from running down. When you want to use the unit, turn it on again.

This setting can also be set to [OFF]. (l 144, POWER SAVE)

LSQT1011