Panasonic VDR-D300 Using an SD card on a computer Macintosh, Connection, 140

Using an SD card on a computer (Macintosh)

Using an SD card on a computer (Macintosh)

Connection

¬Connect this unit to the AC adaptor.

¬Insert an SD card with recorded images in the unit, turn on the unit and then rotate the mode dial to select .

1Press the MENU button, then select [ SETUP]

# [ USB FUNCTION] # [PC CONNECT] and

press the joystick.

≥Press the MENU button to exit the menu screen.

2 Connect this unit and a computer.

AUSB cable (supplied)

≥Insert the plugs as far as they will go. The unit

and computer will not operate properly if the plugs are not inserted fully.

icon appears.

≥ Do not use any other USB cables except the supplied	A
one. (Operation is not guaranteed with any other USB
cables.)

With a computer

≥When the unit is connected to a computer, the operation mode cannot be changed and its power cannot be turned off.

In this case, disconnect the USB cable (l 141).

≥When a computer is accessing a card in this unit,

the card access lamp lights. ( appears on the LCD monitor.) Do not disconnect the USB cable or AC adaptor while the card is being accessed as it may damage the data.

140

LSQT1011