Panasonic VDR-D300 operating instructions 148, About recovery

Indications

CARD FULL.	The SD card is full so no further data can be recorded. Delete
	unnecessary files (l 94) or insert a new SD card.
PUSH THE RESET	An irregularity in the unit has been detected. Press the RESET
SWITCH.	button to restart the unit. (l 155)
CHANGE TO MANUAL
MODE.	You are attempting to use a function that cannot be used
CANCEL MAGICPIX MODE.	simultaneously.
TURN OFF POWER LCD.
	With DVD-RW (Video format) and DVD-R, if the number of
CANNOT SET.	dates displayed becomes 99 when [PLAY MODE] is set to
	[BY DATE], you cannot change the aspect setting from 16:9 to
	4:3 and vice versa.
CHANGE MODE TO USE	The USB cable is connected in the recording mode.
USB.
	You are attempting to turn the mode dial with the USB cable
	connected to the unit.
DISCONNECT USB	The unit’s power cannot be turned off when the unit is
	connected to the computer.
CABLE.
	The unit cannot correctly establish the connection to the
	computer or printer. Disconnect and then reconnect the USB
	cable or check the [USB FUNCTION] setting on this unit.

About recovery

It is possible that the system cannot complete writing of a file normally when, for example, power is turned off for some reason during recording or editing.

If faulty management information is found when a disc is accessed, the following message may appear. Be sure to follow the messages. (Repairing may take time depending on the error.)

DISC ERROR HAS OCCURRED. REPAIR DISC NOW?

Others

≥When you repair the disc, use a battery with sufficient battery power or the AC adaptor.

≥Depending on the condition of the data, it may not be possible to completely repair the data.

≥If the disc is removed without it being repaired, you will no longer be able to playback the scenes recorded before the power went off.

≥Do not repair a disc that has been recorded on another device. This may cause the loss of data or the disc.

148

LSQT1011