Panasonic VDR-D300 128, Insert a brand-new DVD-RW or DVD-R disc into the unit, On the computer

Creating a DVD-Video disc on a computer (Windows)

3(On the computer)

Select [start] # [All Programs (Programs)] #

[Panasonic] # [DVD-MovieAlbumSE] #

[DVD-MovieAlbumSE].

DVD-MovieAlbumSE starts and the images recorded on the disc are displayed.

When starting DVD-MovieAlbumSE, the [Mount Information] dialog box may appear or the recorded images may not be shown. If this occurs, try the following procedure. If there are multiple drives, a drive other than this unit may be selected.

1)Click [Preference] on the dialog box or ([Preference]) button at top right of DVD-MovieAlbumSE screen, and then click the [Device setting] tab.

2)Choose the drive where the disc is loaded in the [Drive Select] column, and then click [OK].

With a computer

4(When using a DVD-RAM only)

Edit the images on the disc as required.

5Click ([Additional]) and select [File Export] #

[Export all titles] or [Export a title].

6Set the export settings in the [Export all titles] ([Export a

title]) screen and click [Start].

≥It is recommended that you do not change the settings displayed on the screen.

7When export is complete, a message will appear. Check the small box for [Eject the disc being used.],

and then click [Yes].

DVD-MovieAlbumSE automatically closes and DVDfunSTUDIO automatically starts.

8 Insert a brand-new DVD-RW or DVD-R disc into the unit.

128

LSQT1011