VIZIO VP322 HDTV10A User Manual
2.2Connecting Coaxial (RF)
2.2.1Using Your Antenna or Digital Cable for DTV /TV
1.Turn off the power to the HDTV.
2.Connect the coaxial (RF) connector from your antenna or digital cable
3.Turn on the power to the HDTV.
4.Select DTV using the INPUT button on the remote or side of the High Definition TV, or directly by pressing the TV button on the Remote Control.
Note:
a)Not all digital TV broadcasts are High Definition (HD). Refer to the program guides, or consult your cable, satellite or TV station operator.
b)Digital broadcasts are not available in all areas. Refer to www.antennaweb.org for detailed information.
c)Make sure the antenna and coaxial cable are correctly grounded.
d)For Professional antenna installation contact us at www.VIZIO.com or call
2.2.2Using the Antenna or Cable through your
VCR
1.Turn off the power to the HDTV and VCR.
2.Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the rear of your VCR to the DTV/TV CABLE/ANTENNA connector at the left hand side of the High Definition TV.
3.Turn on the power to the HDTV and VCR.
4.Select TV using the INPUT button on the remote or side of the High Definition TV, or directly by pressing the TV button on the Remote Control.
Note: If you have an
Version 4/8/2008 | 14 |
| www.VIZIO.com |