Vizio VP322 - page 24

VIZIO VP322 HDTV10A User Manual
Version 4/8/2008 24
www.VIZIO.com
2.7
2.72.7
2.7 Con necting an exte rnal Re ceiver/ Amp
Connec ting an externa l Recei ver/Amp Connec ting an externa l Recei ver/Amp
Connec ting an externa l Recei ver/Amp
2.7.1
2.7.12.7.1
2.7.1 Op tical Output of Audi o
Optical Output of Au dioOptical Output of Au dio
Optical Output of Au dio received with HD
receiv ed with HD receiv ed with HD
receiv ed with HD
Program s
Program sProgram s
Program s
If your sound system has a SPDIF (optica l) digital audio input you can connect it to the
optical DIGITAL AUDIO OUT (white area) at the left hand side of the PL ASMA HDTV. This
is active when receiving audio with the program being viewed no matter what input (TV, AV,
Component or HDMI) is being used.
1. Turn off the power to
the Plasma HDTV and
Receiver/Amp.
2. Using an audio cable
(optical cable), connect
the cable to the audio input connect or on the Receiver/Am p and connect the
other end to the OPTICAL OUT (white area) audio connector at the side of the
Plasma HDTV.
3. Turn on the power to the Plasma HDTV and Receiver/Amp.
4. Then press the MENU button on the remote control to open the O n-Screen
Display (OSD) menu.
5. Press the on the remote control to select the Audio menu.
6. Press the on the remote control to select SPEAKERS.
7. Press the on the rem ote control to select OFF so that the sound from the
Plasma HDTV will now be routed through your Receiver/Amp system.
Press the LAST key once to return to the previous screen or repeatedly to return to your
program if task has been completed.
Note:
a) Refer to your Receiver/Amp user manual to select the corresponding audio
input.
b) The audio output can not be connected directly to external speakers.