Hitachi CMP4212 Prevention of an obstacle to Radio receivers, Precaution during transportation

Page 9

SAFETY INSTRUCTIONS (continued)

• Prevention of an obstacle to Radio receivers

This monitor has been designed pursuant to the international EMI standards. This is to prevent a problem to Radio receivers.

-Keep the monitor away from Radio.

-Adjust Radio antennas in order for the monitor not to receive interference.

-The antenna cable of Radio should be kept away from the monitor.

-Use a coaxial cable for antenna.

You can check if this monitor influences Radio receivers by turning off all other equipment other than the monitor. If you find a problem receiving Radio when using the monitor, check the instructions mentioned above.

•Precautions for the cable connection

-Do ensure that all connections, (including the power plug, extension leads and interconnections between the pieces of equipment), are properly made and in accordance with the manufacturers instructions. Switch off and withdraw the power plug before making or changing connections.

-Confirm the connector is fixed tightly when the signal cable is connected. Also confirm the screws on the connector are tightened.

-Plug the power cord of the monitor into a different socket from that for other equipment, such as Radio etc..

-Use a plug with ground terminal and make sure that it connects to the ground.

•Precaution during transportation

Please pay attention when you transport this monitor because it is heavy.

Furthermore, use the original carton box and its packaging materials when the monitor is transported.

Failure to transport the monitor in any carton except the original carton may result in damage to the monitor.

Save the original carton box and all packing material.

Do not physically impact the remote control.

A physical impact could cause damage or malfunction of the remote control.

•Take care not to drop the remote control.

•Do not place heavy objects on the remote control.

Avoid strong rays.

Any strong rays (such as direct sun rays or room lighting) onto the remote control sensors could invalidate the remote control.

Avoid radio interference.

Any interfering radiation could cause distorted images or noises.

• Avoid radio generator such as a mobile telephone, transceiver, etc. around the monitor.

Set the sound volume at a suitable level.

It is better to keep the volume level low and close the windows at night to protect the neighborhood environment.

•Precautions for the installation

-Do not use makeshift stands and NEVER fix legs with wood screws - to ensure complete safety, always fit the manufacturers approved stand or legs with the fixings provided according to the instructions.

-Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

-This product is designed to comply with the recommended safety standards for tilt and stability. Do not apply excessive pulling force to the front, or top, of the cabinet that could cause the product to overturn resulting in product damage and/or personal injury.

-Follow instructions for wall, shelf or ceiling mounting as recommended by the manufacturer.

-Only use the attachments/accessories specified by the manufacturer.

-Consult your dealer if you are in any doubt about installation, operation or safety of your equipment.

•Other precautions

-Do not leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand-by mode. Switch off using the switch on the equipment and show your family how to do this. Make special arrangements for infirm or handicapped people.

-Disposal of this product may require specific instructions pertaining to your resident region.

-Never guess or take any chances with electrical equipment of any kind - it is better to be safe than sorry!

ENGLISH

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents CMP4211 black CMP4212 silver Important Safety Instructions Prevention of Screen Burn Features Contents About the Symbols Safety InstructionsBe cautious of the power cord connection Safety InstructionsBe sure to keep safety ground connection Be careful in handling the battery of the remote controlRemove the power cord for complete separation Avoid a high temperature environmentInstallation environment How to view the monitorPrecaution during transportation Precautions for the cable connectionDo not physically impact the remote control Set the sound volume at a suitable levelFCC Federal Communications Commission Statement Warning CPU Boards and Power Supplies usedDeclaration of Conformity Class B Personal ComputersMain Unit Component NamesComponent Names Remote control Handling the Remote ControlLoading Batteries Installation Installation InstructionsAnti-tumble measures Securing to a wall or pillarInstallation Instructions Connecting to a PCMonitor rear panel English Turning Power On and Off Operating InstructionsIndicating lamp Input Switching Operating Instructions Volume AdjustmentWhen a button is pressed, the volume adjustment Audio MuteInput Signal Screen Display Size SwitchingDisplay area selection diagram RGB input Operating InstructionsAutomatic Adjustment of Screen Position and the Clock Operating Instructions Using the Menu ScreenOn-screen display system Independent Operation of Multiple Monitors ID NoPicture Menu Audio Menu Timer Menu60Min Function MenuSetup Menu Language Menu Other FeaturesAutomatic Store Menu Display Registration conditionPower Save Mode Other Features Signal CheckWhen the RGB1, RGB2 input is selected Status Display ActionMethods to Reduce the Occurrence of Image Retention Image Retention of Plasma DisplayAbout screen defects About residual imagesSymptoms That Seemingly Appear to be Failures TroubleshootingCheck the way the signal cable is connected Check to see if the input signal matches the monitorSymptom Point to check Example Troubleshooting Actions to Correct Abnormal DisplaysSignal Input Product SpecificationsRGB terminal D-sub 15-pin connector Pin Input signalRecommended Signal List Product Specifications Signal InputWith Digital RGB signal input RGB1 input DVI terminal DVI-DWith Analog RGB signal input RGB2 input Product Specifications Recommended Signal ListSupplement An example of connecting video imaging devices Connecting to a Video Imaging DeviceWith DVI-STB and RGB component setup Optional Video Unit FunctionDisplay size selection diagram AV1 AV2 AV3 RGB2 RGB1 AV4Full Press Using a wide-screen monitorPictures Split Operating Instructions Displaying Multi PictureYNR Operating Instructions Picture Menu Item is added to the Menu shown Color System SystemVideo Input AV2 1st stepAudio Input Operating Instructions Setup MenuScart Output RGB2 1st step RGB2 2nd stepVideo input Input connector pin specifications Scart connector pin specificationsNot Used With R, G, B Video input AV2 and AV4 input With component input AV1, AV2 and RGB2-component inputKHz MHz

CMP4211, CMP4212 specifications

Hitachi CMP4212 and CMP4211 are renowned models within the realm of industrial-grade flat panel displays, known for their advanced technologies and features suited for various applications, including professional broadcasting, healthcare, engineering, and digital signage. These models showcase Hitachi's commitment to providing high-quality visual solutions while integrating innovative technologies designed to enhance user experience and reliability.

One of the defining characteristics of the CMP4212 and CMP4211 is their impressive display performance. Both models feature a 42-inch diagonal screen, delivering vibrant colors and incredible image clarity. Equipped with high-resolution capabilities, the displays provide sharp and detailed visuals, making them ideal for environments where precision and clarity are paramount. With a contrast ratio that ensures deep blacks and bright whites, users can expect enhanced visibility in various lighting conditions.

These models utilize advanced LCD technology, ensuring a wide viewing angle. This is particularly beneficial in settings where multiple viewers are positioned at different angles, allowing for consistent image quality across the viewing plane. Additionally, the displays incorporate Hitachi's proprietary image enhancement technologies, which further improve picture quality and reduce visual artifacts, ensuring that the images presented are both accurate and appealing.

Durability is another hallmark of the CMP4212 and CMP4211. Designed for heavy-duty usage, these displays are built to withstand the rigors of demanding environments. Their rugged construction, along with protective glass overlay, ensures that the screens are resilient against scratches and impacts. This makes them an excellent choice for hospitals, control rooms, and other locations where longevity is crucial.

In terms of connectivity, both models offer a variety of input options, including HDMI, VGA, and component video, enabling compatibility with a wide range of devices. This versatility simplifies integration into existing systems, allowing for seamless operation whether used for presentations, video playback, or complex data displays.

Energy efficiency is another noteworthy aspect of the CMP4212 and CMP4211. With advancements in power management, the displays consume significantly less energy compared to traditional models. This not only reduces operational costs but also supports environmentally friendly practices.

In summary, Hitachi CMP4212 and CMP4211 stand out due to their remarkable display performance, durability, versatile connectivity, and energy efficiency. These features make them ideal candidates for any professional environment where high-quality visual presentation is crucial, ensuring that they continue to meet the demands of users across various industries.
Top Page Image Contents