Hitachi CMP4212, CMP4211 user manual Safety Instructions, Be cautious of the power cord connection

Page 7

SAFETY INSTRUCTIONS (continued)

WARNING

Be cautious of the power cord connection.

Incorrect connection of the power cord could result in fire or electrical shock.

•Do not touch the power cord with a wet hand.

•Check that the connecting portion of the power cord is clean (with no dust), before using. Use a soft and dry cloth to clean the power plug.

•Insert the power plug into a power outlet firmly. Avoid using a loose, unsound outlet or contact failure.

• Do not cut off the fitted power plug, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an appropriate extension lead or consult your dealer.

•Should you require replacing the fuse in the molded plug with a new fuse, then please replace with new one of the same value, type and approval as the original. Ensure the fuse cover is returned to its original position.

Be sure to keep safety ground connection.

Connect the ground terminal of AC inlet of this monitor with the ground terminal provided at the power outlet using the enclosed

power cord. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet.Surely connect

ENGLISH

Be careful in handling the power cord and external connection cables.

the ground wire.

If you keep using a damaged the power cord or cables, it can cause a fire or electrical shock. Do not apply too much heat, pressure or tension to the power cord and cables.

If the power cord or cables are damaged (exposed or broken core wires, etc.), contact your dealer.

•Do not place the monitor or heavy objects on the power cord and cables. Also, do not place a spread, cover, etc, over them because this could result in the inadvertent placing of heavy objects on the concealed power cord or cables.

•Do not pull the power cord and cables. When connecting and disconnecting the power cord or cables, do it with your hand holding the plug or connector.

• Do not place the cord near the heater.

•Do not touch the power plug just after disconnecting it from the power outlet to prevent electric shock.

•Do not touch the power plug when lightening is close to you.

•Avoid coiling the power cord and bending it sharply.

•Protect the power cord from being walked on, pinched particularly at plugs, conveniences receptacles, and the point where they exit from the apparatus.

•Do not modify the power cord.

Be careful in handling the battery of the remote control.

Incorrect handling of the battery could result in fire or personal injury. The battery may explode if not handled properly.

•Keep the battery away from children and pets. If swallowed consult a physician immediately for emergency treatment.

•Do not allow the battery to be exposed to fire or water.

•Avoid fire or high-temperature environment.

•Do not hold the battery with metallic tweezers.

•Keep the battery in a dark, cool and dry place.

• Do not short circuit the battery.

• Do not recharge, disassemble or solder the battery.

•Do not physically impact the battery.

•Use only the battery specified in the manual of this monitor.

•Make sure the plus and minus terminals are correctly aligned when loading the battery.

•If you observe a leakage of the battery, wipe out the liquid and then replace the battery. If the liquid adheres your body or clothes, rinse well with water.

•Obey the local laws on disposing the battery.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents CMP4211 black CMP4212 silver Important Safety Instructions Prevention of Screen Burn Features Contents About the Symbols Safety InstructionsBe careful in handling the battery of the remote control Safety InstructionsBe cautious of the power cord connection Be sure to keep safety ground connectionHow to view the monitor Avoid a high temperature environmentRemove the power cord for complete separation Installation environmentSet the sound volume at a suitable level Precautions for the cable connectionPrecaution during transportation Do not physically impact the remote controlClass B Personal Computers CPU Boards and Power Supplies usedFCC Federal Communications Commission Statement Warning Declaration of ConformityMain Unit Component NamesHandling the Remote Control Component Names Remote controlLoading Batteries Securing to a wall or pillar Installation InstructionsInstallation Anti-tumble measuresConnecting to a PC Installation InstructionsMonitor rear panel English Operating Instructions Turning Power On and OffIndicating lamp Audio Mute Operating Instructions Volume AdjustmentInput Switching When a button is pressed, the volume adjustmentOperating Instructions Size SwitchingInput Signal Screen Display Display area selection diagram RGB inputIndependent Operation of Multiple Monitors ID No Operating Instructions Using the Menu ScreenAutomatic Adjustment of Screen Position and the Clock On-screen display systemPicture Menu Audio Menu Timer Menu60Min Function MenuSetup Menu Menu Display Registration condition Other FeaturesLanguage Menu Automatic StoreStatus Display Action Other Features Signal CheckPower Save Mode When the RGB1, RGB2 input is selectedAbout residual images Image Retention of Plasma DisplayMethods to Reduce the Occurrence of Image Retention About screen defectsCheck to see if the input signal matches the monitor TroubleshootingSymptoms That Seemingly Appear to be Failures Check the way the signal cable is connectedSymptom Point to check Example Troubleshooting Actions to Correct Abnormal DisplaysPin Input signal Product SpecificationsSignal Input RGB terminal D-sub 15-pin connectorDVI terminal DVI-D Product Specifications Signal InputRecommended Signal List With Digital RGB signal input RGB1 inputWith Analog RGB signal input RGB2 input Product Specifications Recommended Signal ListSupplement Optional Video Unit Function Connecting to a Video Imaging DeviceAn example of connecting video imaging devices With DVI-STB and RGB component setupAV1 AV2 AV3 RGB2 RGB1 AV4 Display size selection diagramFull Press Using a wide-screen monitorPictures Split Operating Instructions Displaying Multi PictureYNR Operating Instructions Picture Menu Item is added to the Menu shown AV2 1st step SystemColor System Video InputRGB2 1st step RGB2 2nd step Operating Instructions Setup MenuAudio Input Scart OutputVideo input Scart connector pin specifications Input connector pin specificationsNot Used With component input AV1, AV2 and RGB2-component input With R, G, B Video input AV2 and AV4 inputKHz MHz

CMP4211, CMP4212 specifications

Hitachi CMP4212 and CMP4211 are renowned models within the realm of industrial-grade flat panel displays, known for their advanced technologies and features suited for various applications, including professional broadcasting, healthcare, engineering, and digital signage. These models showcase Hitachi's commitment to providing high-quality visual solutions while integrating innovative technologies designed to enhance user experience and reliability.

One of the defining characteristics of the CMP4212 and CMP4211 is their impressive display performance. Both models feature a 42-inch diagonal screen, delivering vibrant colors and incredible image clarity. Equipped with high-resolution capabilities, the displays provide sharp and detailed visuals, making them ideal for environments where precision and clarity are paramount. With a contrast ratio that ensures deep blacks and bright whites, users can expect enhanced visibility in various lighting conditions.

These models utilize advanced LCD technology, ensuring a wide viewing angle. This is particularly beneficial in settings where multiple viewers are positioned at different angles, allowing for consistent image quality across the viewing plane. Additionally, the displays incorporate Hitachi's proprietary image enhancement technologies, which further improve picture quality and reduce visual artifacts, ensuring that the images presented are both accurate and appealing.

Durability is another hallmark of the CMP4212 and CMP4211. Designed for heavy-duty usage, these displays are built to withstand the rigors of demanding environments. Their rugged construction, along with protective glass overlay, ensures that the screens are resilient against scratches and impacts. This makes them an excellent choice for hospitals, control rooms, and other locations where longevity is crucial.

In terms of connectivity, both models offer a variety of input options, including HDMI, VGA, and component video, enabling compatibility with a wide range of devices. This versatility simplifies integration into existing systems, allowing for seamless operation whether used for presentations, video playback, or complex data displays.

Energy efficiency is another noteworthy aspect of the CMP4212 and CMP4211. With advancements in power management, the displays consume significantly less energy compared to traditional models. This not only reduces operational costs but also supports environmentally friendly practices.

In summary, Hitachi CMP4212 and CMP4211 stand out due to their remarkable display performance, durability, versatile connectivity, and energy efficiency. These features make them ideal candidates for any professional environment where high-quality visual presentation is crucial, ensuring that they continue to meet the demands of users across various industries.
Top Page Image Contents