Hitachi 28LD5200E specifications Expression of input signal mode format, Factory Reset

28LD5200E (PW1L)

The Expression of input signal mode (format)

PAL1: RF, S and Composite of PAL/SECAM	Video	System	Judgment of	Video Input	Mode
	Input		H.Frequency	Setup
PAL2: Component of PAL (YCBCR)
		PAL	15.75kHz	Auto	PAL2
PAL3: Component of PAL (YPBPR)			(576i)	SDTV/DVD	PAL2
PAL4: Component of PAL (YCBCR-SCART)				HDTV	PAL3
PAL: PAL1-4		NTSC	15.75kHz	Auto	NT2
			(480i)	SDTV/DVD	NT2
NT1: S and Composite of NTSC
				HDTV	NT3
NT2: Component of NTSC (YCBCR)		PAL	31.25kHz	Auto	HD10
NT3: Component of NTSC (YPBPR)			(576p)	SDTV/DVD	HD10
NT4: Component of NTSC (YCBCR-SCART)				HDTV	HD9
	AV1	NTSC	31.50kHz	Auto	HD3
NTSC: NTSC1-4
			(480p)	SDTV/DVD	HD3
	AV2
HD1-6: Component (shown in the table )				HDTV	HD2
HD7: Component of 1080i/50 (YPBPR)		NTSC	45.00kHz	Auto	HD5
HD8: Component of 1080i/50 (YCBCR)			(720p)	SDTV/DVD	HD6
				HDTV	HD5
HD9: Component of 576p (YPBPR)
		PAL	28.125kHz	Auto	HD7
HD10: Component of 576p (YCBCR)			(1080i)	SDTV/DVD	HD8
HD: HD1-10 of Component				HDTV	HD7
TV: NTSC / HD		NTSC	33.75kHz	Auto	HD1
			(1080i)	SDTV/DVD	HD4
PC: PC signal				HDTV	HD1

Factory Reset

After all of the adjustments of main chassis are finished, perform FACTORY RESET.

Press the SUB-POWER() button, INPUT SELECT() button and button at the same time, and hold for more than 5 seconds.

The unit is set to factory settings.

15

Downloaded From TV-Manual.com Manuals