Hitachi 28LD5200E specifications Features, Precautions

Page 3

28LD5200E (PW1L)

PRECAUTIONS

● How to clean the LCD screen panel of the monitor

Before cleaning the monitor, turn off the monitor and disconnect the power plug from the power outlet.

To prevent scratching or damaging the LCD screen face, do not knock or rub the surface with sharp or hard objects. Clean the screen with a soft cloth moistened with warm water and dry with a soft cloth. If it is not enough, then use a cloth with mild detergent. Do not use harsh or abrasive cleaners.

● How to clean the cabinet of the monitor

Use a soft cloth to clean the cabinet and control panel of the monitor. When excessively soiled dilute a neutral detergent in water, wet and wring out the soft cloth and afterward wipe with a dry soft cloth.

Never use acid/alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax, glass cleaner, etc. especially because they would cause discoloration, scratches or cracks.

1. Features

Large-screen, high-definition LCD panel

The 28-inch color LCD panel, with a resolution of 1280 (H) x 768(V) pixels, creates a high-definition, large-screen (aspect ratio : 15:9) and low-profile flat display. Free from electromagnetic interferences from geomagnetic sources and ambient power lines, the panel produces high-quality display images free from color misconvergence and display distortion.

● High Performance Digital Processor

A wide range of personal computer signals can be handled, from 640 x 400, 640 x 480 VGA to 1600 x 1200 UXGA. (RGB Analog input)

Easy-to-use remote control and on screen display system

The remote control included eases the work of setting display controls. Further, the on-screen display system, displays the status of signal reception and display control settings in an easy-to-view fashion.

● Power saving system

The International ENERGY STAR power saver feature saves power consumption automatically when input sig- nals are not available.

When connected to a VESA DPMS-compliant PC, the monitor cuts its power consumption while it is idle.

● TruBass

TruBass, SRS and () symbol are trademarks of SRS Labs,Inc.

TruBass technology is incorporated under license from SRS Labs, Inc.

One mini D-sub terminal and one DVI-D terminal for RGB input

The D-sub terminal can also receive the RGB-component by On-Screen Display control.

One composite/S.video input terminal and two component video input terminals.

One component input is possible to switch to RGB signal input from the Menu screen.

One SCART terminal for the signal of the European standard.

It operates as composite/S.video input and RGB input terminal, or composite video output terminal.

One composite video output terminal as a monitoring output.

Various input/output terminals.

Tuner and TELETEXT receiver.

High performance type of the remote control.

3

Downloaded From TV-Manual.com Manuals

Image 3
Contents Contents Service Warning28LD5000TA PW1L Precautions FeaturesApplicable video signals for each input terminal SpecificationsCLE-958 Component namesHow to get to Adjustment mode AdjustmentService adjustment items by I2C-bus control MAIN/SUB PWB Panel SGP Svid BELL/HPFLPF Main LPF SUBNJW1320OUT2GAIN Video PWB PWB PanelPDP-BLK ON/OFF NJW1320OUT1GAIN Video PWBSUB Contrast AV3 HD-PHASEDSUBAGC Inputmfe Main SUB Contrast AV2Ntsc Cmthreshold D15-D8Cmthreshold D7 -D0 Color System CONTROL-MODE0BW, 23.58NTSC, 34.43NTSCMCNRP7 MYNRP8 HD1/HD4/HD5/HD6/HD7/HD8MCNRP5 MCNRP6 NT2/NT3/NT4/PAL2/PAL3/PAL4CHHPF1 CVDSBG1CVDSBC1 CVECLP1EUYHECLPL3EP1 TimeoutAVC EUYHECLPL3EP0Factory Reset Expression of input signal mode formatAutomatic Signal Level ADJ Ustment -RGB Color Temperature Adjustment -VIDEO Color Temperature Adjustment -PC Troubleshooting How to get to Burn-in modeHow to recover the remote and front key function Yes PWB? Self-Diagnosis Function Signal circuit self-diagnosis functionUpdated Parts List For this Model is Available on Esta Block diagram 1/2 Block diagramBlock diagram 2/2 Connection diagram Wiring diagram      Disassembly diagramHitachi Atago Building