Add New Channels
This tuning menu consists of two parts:
•Automatic Search
•Manual Search
Installation
Add New Channels Automatic Search First Time Installation Manual Search
Automatic Search
Automatic search is started by pressing the OK button in the
All channels found are stored in a sorted form with respect to their channel numbers. Some services may not appear with the correct channel number. If the broadcaster has no channel information, this may happen due to missing info.
Manual Search
In manual search, the number of the multiplex is entered manually and only that multiplex is searched for the channels. For every valid channel number, signal level, signal quality and network name are shown at the bottom of the screen.
In both manual and auto search, any existing channel in the database is not
First Time Installation
The user can use this item to load default settings, which were loaded to the receiver at the factory.
To install factory settings, highlight “First Time Installation” menu and press the OK button.
Installation
Add New Channels
First Time Installation
Then you will be asked to confirm for deleting all channels and settings:
Your previous digital channel list will be destroyed. Are you sure you want to delete all digital channels and settings for first time installation?
Yes |
| No |
By selecting Yes and pressing the OK button, the existing channel table will be deleted.
After factory settings are loaded, “First Time Installation” menu will be displayed:
Please ensure aerial is plugged in. Do you want to start first time installation?
Yes |
| No |
|
|
|
Press the OK button to start installation. After search is completed for digital channels, a message asking whether to search for analogue channels appears on the screen:
Do you want to search for analogue channels?
Yes |
| No |
|
|
|
Press the OK button to search for analogue channels.The following menu appears on the screen for analogue channel search:
Auto. Programming System |
|
Language | English |
Country | U.K. |
Txt. Region | West Europe |
Check the antenna cable |
|
Start : Ok | Exit : TV |
Set Language item by pressing or button. Press or button to highlight Country item and then use or to set. Press or button to highlight Txt. Region. Select a region by using or button. When finished, press OK button to continue. To cancel, press the
TV button. The following menu will be displayed during the APS process:
- 26 -