If it is correct, the Parental Settings menu will be displayed including the following items:
Menu Lock | Installation |
Set Lock Key |
|
There you can set/reset locking for the main menu or the installation menu to restrict access. If the menu lock is disabled, there will be free access to the menu system. Also in this menu you can change the lock key and set/change parental lock mode.
Disabled: All menus are unlocked.
Main Menu: Main menu is accessible only with the correct lock key. So the user cannot add, delete, rename, move channels, cannot set timers.
Installation: Installation menu is locked, so the user cannot add channels.
Note: Changes will be updated after exiting configuration menu.
Timers
You can set a timer to switch the TV to any channel without your intervention. This is also for making video recordings of programmes when you are out.
Display the main menu by pressing the M button. Highlight the Timers line by pressing 
or 
button and press the OK button to display the Timer menu:
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
- 29 -
Up to five separate timer events can be set and each is displayed in the Timer screen, showing the event number, the channel to be selected, the start time, end time, date and the mode - whether that event is active (and will be acted on) or not.
TIMER MENU
No Channel Name | Start | End | Date | Mode | |
1. | ITV 1 | 20:00 | 21:00 12/05/2005 | Active | |
2. | BBC ONE | 00:00 | 00:00 | 01/01/2005 | Inactive |
3. | BBC ONE | 00:00 | 00:00 | 01/01/2005 | Inactive |
4. | BBC ONE | 00:00 | 00:00 | 01/01/2005 | Inactive |
5. | BBC ONE | 00:00 | 00:00 | 01/01/2005 | Inactive |
6. | BBC ONE | 00:00 | 00:00 | 01/01/2005 | Inactive |
| Toggle Mode | MENU Exit SELECT | Edit Timer | i More | |
•To set an event, highlight its mode button using the 
or 
button and press the OK button to display the timer entry window.
|
|
|
Name: | 3. ITV 1 |
|
Start: | 00:00 |
|
End: | 00:00 |
|
Date: | 03/06/2005 |
|
Mode: | Once | |
|
|
|
•Here the five settings consisting of the channel name, start time, end time, date and frequency mode can be set. You can move freely between each setting using the 
or 
buttons.
•The channel name is set using the 
or 
button to display the channel which broadcasts the programme.
•The start time, end time and date are each set with the numeric buttons on the remote control in
•The frequency mode determines how often the receiver operates this event and is set with the 
or 
button to be either Once, Daily, or Weekly.
If an invalid number for the start or end times or the date is entered, “Entered time is not valid” message appears on the menu screen.