PROGRAMMING
Programme | 4 |
Band | S |
Channel | 30 |
Standard | BG |
Colour System | PAL |
Back : Menu | Exit : TV |
Programme
Select Programme by pressing / button.
Press / button to select the programme number. You can also enter a number via the numeric buttons on the remote control. There are 100 programme storage between 0 and 99.
Band
Band can be selected either C or S. Press
/ button to select Band.
Channel
Select Channel by pressing / button. Channel can be changed by pressing / button or the numeric buttons.
Standard
Select Standard by pressing / button. Use / button to change the standard to B/G,
D/K, I or L/L'.
Colour System
Select Colour System by pressing / button. Use / button to change the colour system to PAL, SECAM or AUTO.
Search
Select Search by pressing / button. Press
/ button to start search. The search will stop when a signal is found.
Note: If you press the buttons with
VCR Mode
Select VCR Mode by pressing / button. Use / buttons to set VCR Mode as On or Off.
Hint: If you want to watch a DVD , then you have to set this item as Off.
Decoder
You can use this mode to connect any decoder to your TV.
Select Decoder by pressing / button. Press the / buttons to turn it On or Off.
When you switch the Decoder setting to Off,
Hint: Decoder setting should be stored separately for each programme.
Store
Select Store by pressing / button. Press
or OK button to store the settings. “Stored” will be displayed on the screen.
A.P.S.
Select A.P.S. by pressing / button. Press button to enter the A.P.S. submenu:
Auto. Programming System |
|
Country | U.K. |
Warning! All prestored programs |
|
will be deleted |
|
Start : Ok |
|
Back : Menu | Exit : TV |
A.P.S. Country
Press / button to set your country.
- 35 -