Function Introduction, Ⅰ Picture, ⅡSound

Menu Operation

1.Use the On Screen Display menu to set and adjust functions

2.Use 【CH+】/【CH-】to select the desired menu after pressing【MENU】, then press【VOL+】

【/ OK】to enter the corresponding menu and use【CH+】【/ CH-】to choose from the menu option;

Use 【VOL+】/【VOL-】to adjust the options value and return to the previous menu by pressing 【MENU】again. The menu will disappear without any operation within 10 seconds.

Function Introduction

In TV, AV, S-VIDEO, YPbPr and PC modes

ⅠPicture

●Brightness

To adjust the picture’s brightness

●Contrast

To adjust the picture’s contrast.

●Sharpness

To adjust the picture’s definition.

●Colour

To adjust the picture’s color.

●Tint

To adjust the picture’s tint. (For NTSC signal only)

Note: Picture menu options in other signal sources. AV/S-VIDEO: the same as in TV mode

YPbPr/PC: only two options of Brightness and Contrast

ⅡSound

●Volume

To increase or decrease the volume.

●Balance

To balance the volume between the left and right speakers.

●Woofer

To turn on/off the woofer.

●Spatial

To turn on/off the surround.

●Equalizer (submenu)

Use 【 VOL+ 】/ 【OK 】to enter the Equalizer (submenu), you can increase or decrease the value of the sound output in every frequency band preferred

Note: The Audio menu options are the same in TV signal as well as in other signal sources