Polaroid FLA-1512B manual TV works normally/is power off

Sleep 30

●Channel Switch

Use the number buttons to choose the desired channel directly or press【CH+】/【CH-】on the panel or【CH+】/【CH-】on the remote control to select the channel number. If a channel number is in SKIP ON mode, the next channel will be displayed.

A maximum of 3 digits can be keyed in at one time with the number button on the remote control. The symbol of “- - ” on the upper-right corner represents tens and one respectively.. ,two digits are only admitted if a number input is beyond the range and the number for hundred digit is bigger than “2”.The first input number is for hundreds, if it is “1”,“1- -”appears on. The TV will switch to channel 1 if no number is input in 3 seconds. The second is for tens if it is “2”,“12 -”appears on. The TV will switch to channel 12 if no number is input in 3 seconds and the third is for ones., Press 【OK】to turn to the desired channel quickly after the corresponding number is input.

Note: This function is only available in TV mode

●Sleep Function

Press【SLEEP】on the remote control once to activate the function and subsequent keying in to select the sleep time of 0, 15, 30, 45, 60,90, 120, 150,180, 240 and 0 minutes. This is will be reflected in the top right hand corner of the screen. After this step is done, press【SLEEP】to view the set sleep. See the illustration in the right.

● Indicator Light

Status	Light Colour	Description
On/Off	Off	The TV works normally/is power off
Standby	Red	In Standby Mode
Timer On/Off Or Sleep	Green	Timer On/Off is valid or Sleep is on
Sleep (PC)	Yellow	Sleep for power-saving;
Receives signal from	Flickering	The indicator will flicker when the TV
the remote control		receives signal from the remote control

15