Polaroid FLA-1512B manual Troubleshooting

TROUBLESHOOTING

Before calling a technician, please check the following table to see if the below mentioned symptoms can be diagnosed and fixed.

Symptoms	Possible Reasons		Correction
No picture, no	1. The power cord is not plugged	1. Plug the power cord in
sound, and no	in	2. Turn on the power
indicator light	2. The power is off
on
No picture, no
sound, but the	Functions of ON/OFF TIME and	Press【	】to turn on the TV
green light	SLEEP have been set
indicator
No picture, no	1.PC is in VGA Mode without any	1.Press 【		】or	input the PC
sound, but the	PC signal input	signal
yellow light	2.The signal cord is not connected	2.Connect		the	signal	cord
indicator	correctly	properly
		1.Adjust the value of Contrast,
Picture and	1.Contrast, sharpness, and colour	sharpness, and colour
	are set improperly	2.Set the	Colour		System to	the
sound with
	2.Colour system is set improperly	country broadcasting standard
abnormality
	3.Sound system is set improperly	3.Set the Sound System to the
		country broadcasting standard
Picture is	Signal source is low-grade or the
spotted or with		Use the qualified signal cord
snow	signal is in a lower quality
Blue	No Video signal or the signal cord is	Connect the signal cord properly
background	improperly/not connected
Picture is
unclear, or		Adjust automatically by selecting
moves or have		Auto Adjust or adjust Clock 、
black stripes	Picture is not well adjusted	Phase、H Position and V Position
on horizontal		manually after enter into the PC
position in PC		Setup menu to solve this problem
mode
PC Picture is		Adjust pictures automatically by
not in the
	Picture is not well adjusted	resetting	H Position、V Position、
middle of the
		Phase and Clock
screen
No sound	No Audio signal or the signal cord is	1.Connect the audio signal cord
	improperly/not connected	properly
		2.Set the sound system properly
		1.Make sure the positive and the
The remote		negative polarities are correct.
	Batteries are improperly installed or	2.Check if there is loose contact
control does
	exhausted	between	the	springs and		the
not work
		batteries.
		3.Replace the batteries
	16