Installation Steps

MLC 60 Series • Setup Guide

for the MLC 62 RS EU and the MLC 62 RS MK

						:
					TANT			for	the
						.com			the


	IMPORon						installation
			.extr			and	installation
Goto	www					and			the
	www			guide connecting .
		user		guide connecting .
		user			e			source
complete			befor			power
complete					the	power
instructions
oduct			to
oduct			to
pr

The Extron MLC 62 RS EU and the MLC 62 RS MK are keypad controllers for use in classrooms and meeting facilities. The EU model attaches to a single size European electrical junction box with a 60 mm mounting center; the MK model mounts to a single size MK junction box. The controllers have backlit soft touch buttons and can control common AV functions, including power, input switching, and volume. Both models provide RS-232 serial and IR ports for universal display control. A digital input and two relays enable monitoring and controlling of other devices in the room. Both models have six-button and eight-button options.

DISPLAY

ON OFF

VOLUME

PC VIDEO

LAPTOP MUTE

Extron

MLC 62 RS EU

DISPLAY

ON OFF

VOLUME

PC VIDEO

LAPTOP MUTE

Extron

MLC 62 RS MK

NOTES: • Installation and service must be performed by authorized personnel only.

• For full installation, configuration, and operation details, see the MLC 60 Series User Guide, available at www.extron.com.

1.Prepare the installation site.

The MLC 62 EU and MK controllers can be installed in a standard EU or MK one-gang electrical wall box:

a.Install the electrical box, following the instructions provided with it.

CAUTION: Ensure that the junction box is properly grounded.

b.Prepare and pull the cables through the electrical box.

1	2	C	Tx/	Tx
1	2	C	IR	Tx
			IR
RELAYS			PORT B	PORT A
	N/O		IR/ S	RS-232

		xma A 4.0	V
TINPU	CONFIG	12	V
LDIGITA	HOST/	PWR
R		+
1	Rx Tx	+

Rear Panel

Left Side Panel

2.(Optional) Change the faceplate and buttons as needed.

a. Remove the faceplate from the MLC module as follows:

	i.	On the right and left edges of the faceplate are two pairs of slots, into	DISPLA
	i.		ON	Y
		which two small tabs on either side of the MLC fit. Insert the flat end		F
				OF
		of a small screwdriver into each side slot (as shown at right) and press	VOLUME

		inward until the tab is released from its slot.	PC
		Lift the faceplate off the MLC circuit board.	PC	O
	ii.			O
	ii.		LAPTOP	VIDE
b.	If desired, replace the buttons in the faceplate as follows:		LAPTOP	MUTE
b.				MUTE

i.From the front of the faceplate, press the button membrane to be

replaced backward through its faceplate openings until it comes free.	Slot
If replacing the faceplate, repeat this step until all the buttons are
removed.

	ii.	On the back of the faceplate, set the new button membrane at the
Button		desired location, with the two pegs in the upper-left and lower-right
Button		corners of the membrane in the faceplate holes at opposite corners of the
Membrane
		row (see the illustrations at left and at right). Press the pegs and buttons
P	MUTE	of the membrane into the faceplate.
P		Repeat step 2 b as needed.
LAPTO	iii.	Repeat step 2 b as needed.

Pegs (2)

Peg

MLC 62 RS MK, MLC 62 RS EU specifications

The Extron MLC 62 RS MK and MLC 62 RS EU are sophisticated control systems designed for managing audiovisual (AV) equipment in various environments such as classrooms, lecture halls, and conference rooms. These models are part of Extron's well-established MediaLink Controller series, known for their user-friendly interfaces and powerful functionality. They are critical tools for simplifying AV operation and creating an intuitive experience for users.

One of the standout features of the MLC 62 RS MK and MLC 62 RS EU is their ability to control multiple AV devices from a single interface. This includes projectors, displays, video conferencing systems, and audio equipment. By consolidating control into one device, users can save time and reduce the complexity of managing AV installations.

The controllers are equipped with six customizable buttons that can be programmed to perform a variety of functions, such as turning equipment on or off, switching input sources, or adjusting volume levels. This versatility means that users can tailor the system to meet their specific needs effectively, ensuring a seamless AV experience.

Incorporating advanced technologies, the MLC 62 RS models feature Extron's robust RS-232 and relay control capabilities, allowing for direct communication with a wide range of third-party AV devices. These features facilitate integration in diverse installations and ensure compatibility with various components, minimizing issues related to devices not communicating properly.

The design of the MLC 62 RS MK and MLC 62 RS EU is also user-centric. With an intuitive graphical user interface and easy-to-read labels, operators can easily navigate the system without needing extensive technical knowledge. This design philosophy enhances usability in educational and professional settings, where quick access to AV control is essential.

Moreover, both models support Ethernet control, enabling remote management and monitoring of AV systems from a centralized location. This feature makes it easier for IT and AV professionals to troubleshoot issues, perform updates, and ensure optimal performance of the AV ecosystem.

Another important characteristic is their compact form factor. These controllers can be easily mounted on a wall or installed in a tabletop configuration, making them suitable for various applications where space efficiency is a priority.

Overall, the Extron MLC 62 RS MK and MLC 62 RS EU are powerful and flexible control solutions designed to meet the demands of modern AV environments. With their intuitive controls, extensive connectivity options, and ease of integration, they stand out as essential tools for enhancing AV management and user experience in a multitude of settings.

MLC 60 Series • Setup Guide

for the MLC 62 RS EU and the MLC 62 RS MK

TANT