Sennheiser RS 65 manual Wireless RS

Wireless RS 65

Thank you for choosing Sennheiser! Over half a century of accumulated expertise in the design and manufacture of high-quality electro-acoustic equipment have made Sennheiser a world-leading company in this field. We have designed this product to give you reliable operation over many years.

Please take a few moments to read these instructions carefully, as we want you to enjoy your new Sennheiser product quickly and to the full.

System components and connections - 1 receiver HDR 65

- 1 transmitter T 60

- 2 rechargeable batteries BA 151 - 1 power supply

- 1 mini jack plug 3,5 mm with adapter to 1/4“ 6,3 mm (925 MHz jack to 2x phono plug)

- instructions for use

Establish the necessary connections.

Charge the accupack for 24 hours before you use it for the first time! (Please refer to the section Charging the accupack.)

Where to place the transmitter

Choose a suitable place near your hi-fi system or TV set.

Do not place the transmitter close to metal objects such as shelf bars, reinforced concrete walls, etc.

The transmitter features a convenient automatic on/off function. The transmitter is switched on by

the audio signal. If there is no audio signal for

about 3 minutes, the transmitter automatically switches off. The transmitter is now in stand-by mode, its power consumption is very low so that it can remain connected to the mains. Accupacks can always be recharged when the transmitter is connected to the mains.

English

Switching the headphone receiver on The ON/OFF switch is on the right earpiece.

Switching the headphone receiver off

Make sure to switch off the headphones after each use and store the headphones in the transmitter’s charging compartment to avoid discharging the accupack.

Wireless RS 65-7