Channel List
The channels selected here can be skipped when selecting the channels using CH + /
Those channels can still be selected with the Number buttons.
1
2
3
4 Use ▲/▼ to select the channel you want to remove, then press OK.
Add Channels
This function lets you add the channels that were not added by the autoprogram due to reception conditions at the initial setting.
1 Press MENU to display the main menu.
2 Use ▲/▼ to select [Setup], then press OK.
3 Use ▲/▼ to select [Add Channels], then press OK.
4 Use the Number buttons to enter the number of the channel you want to add, then press OK.
|
|
|
|
|
|
Picture |
|
|
| DTV | 11.1 |
Sound |
|
|
| DTV | 11.2 |
|
|
| |||
Setup | Highlight channels for Ch Up / Down key selection. |
| DTV | 11.3 | |
Features |
|
|
| ||
|
|
|
|
| |
Language |
|
|
|
|
|
| Ch Select | OK Watch/Skip | BACK | Back |
•The channel display for the removed channel darkens. You will not be able to select the channel again using CH + / –
•To reactivate a removed channel, use ▲/▼ and press OK.The registered channels are highlighted.
•When you remove a main channel, its subchannels are removed as well.
5 Press MENU to exit.
Note
•The channel with the [DTV] indicated on the display is ATSC. Otherwise the channel is NTSC.
|
|
| 11 | ||
|
|
|
|
|
|
|
|
|
|
|
|
Picture |
|
|
|
| Add channels |
Sound | For analog channels, select a channel to be |
|
| ||
Setup | added using number keys. |
|
|
|
|
Features | For digital channels, you must perform |
|
| ||
Language | Autoprogram function. |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| Ch Change | BACK Back |
5 Press MENU to exit.
Note
•If setup completes successfully, [Added to the channel list] is displayed.
•If external input is used, it is not possible to register the channel and [Unavailable] will be displayed on the TV screen.
•By using CH + / , you can select the memorized channels only.
20
EN