Magnavox 26MF605W Series owner manual Cable BOX Connections

CABLE BOX CONNECTIONS

If you have a Cable Box, follow either set of these steps to complete your connections.

Disconnect all power sources before making any connections.

Cable Box with RF In/Out Jacks

This connection will not supply Stereo sound to the LCD TV.

1Connect the Cable TV signal to the IN jack (or RF IN or CABLE IN) on the Cable Box.

2Connect an RF coaxial cable (not supplied) to the OUT jack (or TO TV or RF OUT) of the Cable Box.

2

CABLE	TO
IN	TV

OUTPUT

CH

34

75Ω coaxial cable

4

3

3Connect the other end of the coaxial cable to the TV jack (marked 75 Ω) on the rear of the LCD TV.

4Set the Channel (or Output channel) switch of the Cable Box to 3 or 4. Set the TV to the same channel. When watching TV programming, change channels at the Cable Box, not the LCD TV.

Cable Box

1

The Cable TV singal from Cable Company

Cable Box with AV (Audio/Video) Out Jacks

This connection will supply Stereo sound to the

LCD TV.

1Connect the Cable TV signal to the

IN jack (or RF IN or CABLE IN) on the Cable Box.

2Using an RCA-type Video and Audio cable (marked with yellow, red, and white), connect the Cable Box’s Video and Audio Out jacks to the TV’s Video and Audio In jacks.

Note:

1.If your Cable Box is equipped with a S-Video Out Jack, use the S-Video connection for a better picture detail and clarity. Use the S-Video cable to connect the Cable Box’s S-Video Out jacks to the TV’s S-Video In jacks.

2.You can also use the Video and Audio jacks in AV IN 2 and AV IN 3 located on the rear of the TV to connect your Cable Box.

3.Use the SOURCE button on the remote control to select AV 1 (or AV2, AV3,

S-Video1, or S-Video2 if you use the different jacks for this hookup) to watch Cable TV (your Cable Box must be turned on).

MAG-26_eng 0104.indd 10

2

OUTPUT

CH

	3	4
CABLE	TO	L	AUDIO	R	VIDEO
					OUT	S VIDEO
IN	TV		OUT

Cable Box

Cable TV singal

1

10

1/6/2005 10:30:38